Part number(s) for Convertible parts
#1
Junior Member
Thread Starter
Join Date: Aug 2001
Location: U.K.
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Part number(s) for Convertible parts
I asked this question on a couple of other boards (that shall remain nameless !!!) without any response so let's see if I have more luck this time
In the back of the Convertible, on top of the two carpeted covers over the top motors, there are two grey plastic discs (these sit on top of two long studs screwed into the metalwork of the inner rear wing panel). These are what takes the weight of the roof when it is down.
I went all over the computer parts listing for the car here in the U.K. and could not find either the stud (which I don't need) or the grey plastic cover (which I do need) anywhere.
Can anyone help, either with the part number or the description (name) that Mazda uses for this part. Many thanks in advance for any info.
Peter 'Mad Brit' Ball
peterball@beeb.net
RX-7 Turbo II Cabriolet (Convertible)
(the Cabrio/Convertible only came with the Turbo II motor in the U.K. - heeheehee)
Ported engine
G-Force chip
K & N cone filter
Racing Beat 3" presilencer into custom SS 3"/
2 x 2.5" exhaust (V8 sound FOC !!!)
Tokiko Illumina adjustable struts
Eibach Pro-Sport springs F/R
Racing Beat sway bars F/R
Racing Beat/Mazdatrix sway bar links R/F
Polyurethane bushes in front and rear suspension arms
RH Alurad 8" x 17" alloys (OZ Saturn lookalikes) with
215/50 x 17" Yokohama A520's
Goes a bit !!
In the back of the Convertible, on top of the two carpeted covers over the top motors, there are two grey plastic discs (these sit on top of two long studs screwed into the metalwork of the inner rear wing panel). These are what takes the weight of the roof when it is down.
I went all over the computer parts listing for the car here in the U.K. and could not find either the stud (which I don't need) or the grey plastic cover (which I do need) anywhere.
Can anyone help, either with the part number or the description (name) that Mazda uses for this part. Many thanks in advance for any info.
Peter 'Mad Brit' Ball
peterball@beeb.net
RX-7 Turbo II Cabriolet (Convertible)
(the Cabrio/Convertible only came with the Turbo II motor in the U.K. - heeheehee)
Ported engine
G-Force chip
K & N cone filter
Racing Beat 3" presilencer into custom SS 3"/
2 x 2.5" exhaust (V8 sound FOC !!!)
Tokiko Illumina adjustable struts
Eibach Pro-Sport springs F/R
Racing Beat sway bars F/R
Racing Beat/Mazdatrix sway bar links R/F
Polyurethane bushes in front and rear suspension arms
RH Alurad 8" x 17" alloys (OZ Saturn lookalikes) with
215/50 x 17" Yokohama A520's
Goes a bit !!
Thread
Thread Starter
Forum
Replies
Last Post
diabolical1
2nd Generation Specific (1986-1992)
30
01-30-16 05:50 AM
josef 91 vert
2nd Generation Specific (1986-1992)
23
09-03-15 11:20 AM