overheating at cruse solved
#1
Rotary Enthusiast
Thread Starter
iTrader: (1)
Join Date: Sep 2004
Location: seattle wa
Posts: 906
Likes: 0
Received 0 Likes
on
0 Posts
overheating at cruse solved
well after all the new parts, flow tested rad, flushed rad and still over heating at cruse after the greddy fmic. jo anne fabrics and performance store saved the day with plenty of foam carfully fed arround the radiator. the air has no were to go but through the radiator.
so if you just installed your fmic and have air flow problems you dont need to molest your bumper you just a little foam
im not a rocket scientist or any thing and im shure this has already been covered befor somewhere. but i thought you guys would like to know
parts list
1/2 yard dence 2" black foam
one can of 3M 77 spray adheasive
feed foam between the top side of rad to frame
feed foam on both sides of rad to side wall and bottom of rad to belly pan
so if you just installed your fmic and have air flow problems you dont need to molest your bumper you just a little foam
im not a rocket scientist or any thing and im shure this has already been covered befor somewhere. but i thought you guys would like to know
parts list
1/2 yard dence 2" black foam
one can of 3M 77 spray adheasive
feed foam between the top side of rad to frame
feed foam on both sides of rad to side wall and bottom of rad to belly pan
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM
erevos
2nd Generation Specific (1986-1992)
4
09-15-15 09:19 AM