2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Only cranks...

Thread Tools
 
Search this Thread
 
Old Nov 4, 2008 | 04:19 PM
  #1  
rotary#10's Avatar
Thread Starter
Vodak
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (38)
 
Joined: Aug 2005
Posts: 883
Likes: 49
From: Oakland, CALI = O
Only cranks...

Only cranks...

--------------------------------------------------------------------------------

hey folks
i have a 91 n/a fc

the night i picked up my brother the car ran fine.. the next day i went to start the car it would only crank. i thought i was flooded so i tried to de-flood it and it didn't work. i tried pulling the egi fuse and cranking it. And i pulled the plugs and they were bad they did kinda smell gas. so i put another spare new set i have. I tried starter fuild but it didn't work.

My oil is has about over 850 miles
the plugs are new.
the wires are okie all plugged in
i have 12 volts on the gauge on the cluster


still not starting and idling what could it be ?
Reply
Old Nov 4, 2008 | 04:27 PM
  #2  
jmkogut's Avatar
Senior Member
 
Joined: Aug 2008
Posts: 409
Likes: 0
From: Washington
Verify Air, Fuel, and Spark.

Make sure your intake tube is properly connected, and your AFM plug is on securely.

Verify that you do have spark. Remove a plug and see if it sparks.

Verify that you're getting fuel. (It'll spray out of an empty plug hole, make sure to remove the ignition fuse.)
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
12AllWays
2nd Generation Specific (1986-1992)
9
May 25, 2009 09:39 PM
Graffitipanda
General Rotary Tech Support
4
Feb 2, 2009 10:25 AM
RX7forFREE
1st Generation Specific (1979-1985)
1
Jan 25, 2006 10:37 PM




All times are GMT -5. The time now is 12:51 PM.