After swaping TBs last week (tb mod) and guting the vac rack etc. I had to adjust the TPS and idle as inspected. what I noticed today was now my S-afc was only reading 86% at WOT. it was still trying to read the same TPS voltages as before I adjusted it. so I needed to recalibrate it...

after some screwed around. I went into the section where you choose it. (car type) with the arrow up. I changed it to ** for no reading and went back to the main screen. then back to car type and changed it back to arrow up. went back to moniter. and sure enough it hit 100% at about 3/4 throttle. and a few more times pressing it had recalibrated itself so 100% was 100%

just a note for S5 users. if you adjust your TPS. you might need to do this

 

I just added it to the end of my install page for future use...

http://www.1300cc.com/howto/how2/safc.htm

 

scott, i noticed this too as my WOT is only at 86%.

Thanks for hte fix info

 

Do you think this is something that affects the overall performance of the unit as well as the display? I guess what I'm getting at is does the difference between 86% & 100% equate directly to what it thinks it's correcting for?

I ask because on my S4 I've never seen higher than 50+%.

I'm pretty new to the S-AFC and I don't really play with it that much. I'm not even using any positive corrections, but I'm still curious.