2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

no start, no power inside.

Thread Tools
 
Search this Thread
 
Old Nov 8, 2004 | 12:32 AM
  #1  
S13 Slide's Avatar
Thread Starter
Senior Member
Tenured Member 10 Years
 
Joined: Apr 2002
Posts: 317
Likes: 0
From: Washington
no start, no power inside.

this morning i go to move the fc and it doesnt start. when i parked it it ran and started up fine. when i stick in the key, the dash lights work but the radio, defrost/heater doesnt blow, window doesnt go up and the starter doesnt make a sound, headlights/taillights work so does the beeping when the key is in and doors open

i checked the fuse's and none blown/missing. any sugestions on what else i shoudl check? thank

Last edited by S13 Slide; Nov 8, 2004 at 12:35 AM.
Reply
Old Nov 8, 2004 | 12:37 AM
  #2  
WAYNE88N/A's Avatar
Lives on the Forum
Tenured Member 05 Years
 
Joined: Feb 2004
Posts: 5,721
Likes: 3
From: Coldspring TX
What do you mean by "doesn't start"? Doesn't crank? Doesn't light off?

Stick in the key is another one...Turn the key to start? Just turn it on to accessory position? What?

If I could read minds, I'd be rich, lol...
Reply
Old Nov 8, 2004 | 12:40 AM
  #3  
RotaryEvolution's Avatar
Sharp Claws
Tenured Member 15 Years
iTrader: (30)
 
Joined: Oct 2003
Posts: 5,107
Likes: 50
From: Central Florida
you checked the fuses in both the engine bay and at the driver's kick panel/foot rest?
did the lights all go out when you went to crank it? try checking your battery terminals for corrosion or the terminals for looseness.
Reply
Old Nov 8, 2004 | 12:42 AM
  #4  
S13 Slide's Avatar
Thread Starter
Senior Member
Tenured Member 10 Years
 
Joined: Apr 2002
Posts: 317
Likes: 0
From: Washington
yes i checked both fuse box's. the lights didnt dim when trying to crank and the terminals are new. thank you
Reply
Old Nov 8, 2004 | 12:50 AM
  #5  
RotaryEvolution's Avatar
Sharp Claws
Tenured Member 15 Years
iTrader: (30)
 
Joined: Oct 2003
Posts: 5,107
Likes: 50
From: Central Florida
sounds like an ignition switch problem, only thing i can say is to break out your FSM and start probing wires to be sure you are getting power to and from your ignition switch.

GL
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
streetlegal?
New Member RX-7 Technical
13
Mar 17, 2022 02:46 PM
Skeese
Adaptronic Engine Mgmt - AUS
65
Mar 28, 2017 03:30 PM
alphawolff
1st Generation Specific (1979-1985)
17
Nov 17, 2015 05:57 PM
The Shaolin
2nd Generation Specific (1986-1992)
9
Sep 14, 2015 07:50 PM




All times are GMT -5. The time now is 06:58 PM.