No Start, after HU install 12v @ battery
#1
Hail Dented 7
Thread Starter
iTrader: (3)
Join Date: Sep 2010
Location: Vermont
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
No Start, after HU install 12v @ battery
Hey all, sorry for another no start thread.
Here's the story, installed a new HU the other day.
Today I went to take it out of the garage, turn the key nothing. No crank, no clicking, nothin.
The battery tested @ 11.9-12v. Cables are clean and tight, also when I turn the key to on position, none of the warning lights turn on, and gauges do not move. Am I not getting power to the ignition? What would cause that. I had thought it had to do with the HU install, so I unwired it and everything, still a no go.
I have power to the interior lighting though.
Where would you start with this issue? Fuses check out good too. Started before the HU install.
Its finally nice enough out to drive the RX, now I cant....
Any help would be greatly appreciated.
Here's the story, installed a new HU the other day.
Today I went to take it out of the garage, turn the key nothing. No crank, no clicking, nothin.
The battery tested @ 11.9-12v. Cables are clean and tight, also when I turn the key to on position, none of the warning lights turn on, and gauges do not move. Am I not getting power to the ignition? What would cause that. I had thought it had to do with the HU install, so I unwired it and everything, still a no go.
I have power to the interior lighting though.
Where would you start with this issue? Fuses check out good too. Started before the HU install.
Its finally nice enough out to drive the RX, now I cant....
Any help would be greatly appreciated.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
The Shaolin
2nd Generation Specific (1986-1992)
9
09-14-15 07:50 PM