A no hassle full 3" Exhaust?
#1
Junior Member
Thread Starter
Join Date: Mar 2001
Location: Roseburg, Or, USA
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
A no hassle full 3" Exhaust?
I have a 87 TII and im going to put a full 3" exhaust from the turbo all the way back to the Y-pipe. Then a dual cat back exhaust. What i want is to buy the whole exhaust ready to bolt up with no fabrication. Now I know what you all are going to say "Racing Beat". the exhaust sounds good and i even like the price at MazdaTrix. I dont like the looks though. I like the looks of the Dual N1 set up with the whole stainless steel muffler look not just the tip like the Racing beat. So is there a 3" downpipe and mid-pipe/pre-silencer that will bolt up to a Dual N1 set-up with no fabrication?
Lynx
Thanks for any info and just for the record I can spend about $800 total for all the exhaust.
Lynx
Thanks for any info and just for the record I can spend about $800 total for all the exhaust.
#2
Boost This!
Join Date: Nov 2001
Location: Nanaimo, B.C, Canada
Posts: 1,935
Likes: 0
Received 0 Likes
on
0 Posts
take your car to a muffler shop and get them to build u a whole one piece system.. and go single out the back dont split the air for better flow.. 3" all the way.....
#3
Senior Member
Join Date: Feb 2002
Location: South Carolina
Posts: 467
Likes: 0
Received 0 Likes
on
0 Posts
NOt sure but Cork Sport have a stainless exhaust for under $300
http://www.corksport.com/rx7/2rxindex.html
http://www.corksport.com/rx7/2rxindex.html
#6
Corksport sells a 3" SS DP and MP but I am not sure of whether or not it will bolt right up to the N1. I wanted this setup myself but never got the dimensions on the N1's piping.
#7
inteligent extratarestril
Join Date: Mar 2001
Location: The Sunny B.O.P, New Zealand
Posts: 1,313
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by bcty
take your car to a muffler shop and get them to build u a whole one piece system.. and go single out the back dont split the air for better flow.. 3" all the way.....
take your car to a muffler shop and get them to build u a whole one piece system.. and go single out the back dont split the air for better flow.. 3" all the way.....
dis guy hit da nail on da head damn fast yo.........
Trending Topics
#10
Despise Enmity
Join Date: May 2001
Location: Richmond, VA
Posts: 2,420
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Ryde _Or_Die
Hey do you guys think that a muffler shop could make me a 3" y-pipe? I really want dual exhaust and I want everything 3".
Hey do you guys think that a muffler shop could make me a 3" y-pipe? I really want dual exhaust and I want everything 3".
#11
Originally posted by Josepi
Ya, I found a shop willing to do that for me, if I bring them 2 mufflers, they'd make the Y, and install for 120.
Ya, I found a shop willing to do that for me, if I bring them 2 mufflers, they'd make the Y, and install for 120.
#12
SOLD THE RX-7!
Join Date: Mar 2001
Location: Vancouver, BC, Canada
Posts: 7,451
Likes: 0
Received 0 Likes
on
0 Posts
don't get them to "build" you a Y. the flow will probably suck. flowmaster makes some really nice "Ys" it is just the small Y part then you add pipes to it.
Thread
Thread Starter
Forum
Replies
Last Post
msilvia
3rd Generation Specific (1993-2002)
28
04-14-16 12:58 PM
Frisky Arab
2nd Generation Specific (1986-1992)
13
08-18-15 05:30 PM