New to4b vs rebuilt hybrid and fuel upgrades
Thread Starter
Joined: Jul 2002
Posts: 5,093
Likes: 160
From: Defuniak Springs, FL
New to4b vs rebuilt hybrid and fuel upgrades
I'm considering one of two options at this point.
I'm either going to get a t04b Hybrid with my s5 turbo, or a new t04b from fc3s.org.
The price on each is about the same (after getting a new manifold, then getting a downpipe made for the t04b it's still pretty close).
The main question I have is, If I get the t04b, I'll have a walbro and a S-AFC for fuel mods. Is it ok to only upgrade the injectors to 4 720cc injectors and wait for a standalone? I'd like to do it this way so that I can get the standalone later when I'm ready to drop the money for it and really go crazy with boost.
If I went with a hybrid i'd still be limited to under 15psi.
I'm either going to get a t04b Hybrid with my s5 turbo, or a new t04b from fc3s.org.
The price on each is about the same (after getting a new manifold, then getting a downpipe made for the t04b it's still pretty close).
The main question I have is, If I get the t04b, I'll have a walbro and a S-AFC for fuel mods. Is it ok to only upgrade the injectors to 4 720cc injectors and wait for a standalone? I'd like to do it this way so that I can get the standalone later when I'm ready to drop the money for it and really go crazy with boost.
If I went with a hybrid i'd still be limited to under 15psi.
Thread Starter
Joined: Jul 2002
Posts: 5,093
Likes: 160
From: Defuniak Springs, FL
yeah i wasn't considering the price of the wastegate or the lines.
Dave claims the turbo can handle 30 psi...
Take a look
http://www.speedmachineperformance.c...l?v=1&pid=1094
Dave claims the turbo can handle 30 psi...
Take a look
http://www.speedmachineperformance.c...l?v=1&pid=1094
Thread Starter
Joined: Jul 2002
Posts: 5,093
Likes: 160
From: Defuniak Springs, FL
Well I've got about 2 grand alotted for it realistically. My turbo is undriveable. I figured I could get a to4b and keep it at low boost till i can afford the stand alone. I can do turbo, manifold, lines, wastegate and injectors... but not a standalone.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
Skeese
Adaptronic Engine Mgmt - AUS
65
Mar 28, 2017 03:30 PM
immanuel__7
2nd Generation Specific (1986-1992)
89
Sep 5, 2015 10:23 AM






