new radiator
#1
Full Member
Thread Starter
Join Date: Feb 2001
Location: SAN ANTONIO TX.
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
new radiator
I just had to buy a new radiator since mine is cracking on the plastic...i am going to install it myself...is there anything i need to know about changing them? can someone give me a quick how to ... i am not a mechanic just a broke person trying to make it lol...
Peace
Buddy
Peace
Buddy
#2
SOLD THE RX-7!
Join Date: Mar 2001
Location: Vancouver, BC, Canada
Posts: 7,451
Likes: 0
Received 0 Likes
on
0 Posts
first you need to buy some coolant. as yours will all be drained out. you need about 4 liters (1 gallon??) as you mix it with half water. it takes about 8L.
I think you will need to take the fan off. there are 4 nuts holding it on. you can stick a screw driver between 2 of them to stop the fan from moving as you undo them. the fan slides off. next there are a few bolts holding the plastic shrud on. remove those. now remove the lower plastic tray under the car, now you can see the bottom of the rad. there is a drain screw there, be VERY carefull to undo it. it is plastic and will stripe easy. probably better just to pull the lower hose off. but put a drain pan underneith first! take the rad cap off the top, then eitiher pull the bottom hose or plug to drain out the coolant.
now there is a few more bolts holding the rad on. swap them, put the hoses back on. (maybe want to replace them too) and do the reverse.
I think you will need to take the fan off. there are 4 nuts holding it on. you can stick a screw driver between 2 of them to stop the fan from moving as you undo them. the fan slides off. next there are a few bolts holding the plastic shrud on. remove those. now remove the lower plastic tray under the car, now you can see the bottom of the rad. there is a drain screw there, be VERY carefull to undo it. it is plastic and will stripe easy. probably better just to pull the lower hose off. but put a drain pan underneith first! take the rad cap off the top, then eitiher pull the bottom hose or plug to drain out the coolant.
now there is a few more bolts holding the rad on. swap them, put the hoses back on. (maybe want to replace them too) and do the reverse.
Thread
Thread Starter
Forum
Replies
Last Post