2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Negative battery cable to starter

Thread Tools
 
Search this Thread
 
Old Nov 30, 2017 | 02:13 PM
  #1  
littlebit421's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Jul 2010
Posts: 467
Likes: 11
From: Carolinas
Negative battery cable to starter

87 N/A Does it matter which bolt to the starter you put the negative battery cable to? Just wondering, Im not having any issues.
Reply
Old Dec 2, 2017 | 01:53 AM
  #2  
misterstyx69's Avatar
Retired Moderator, RIP
Tenured Member: 20 Years
iTrader: (142)
 
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
Although the bracket on the wiring harness doubles as a Ground point and goes to the longer Upper bolt on the starter(engine and trans through bolt) It sits on the engine side.
I personally don't like that and try to get a good ground point to the starter without going through all the mounted metal.
If you really want to give the starter a good Ground then just run another Ground Up to the Negative.
I put a ground wire on at the trans to the chassis.The car has a small ground at the wiper motor area that does that But I add a thicker one and attach it on one of the trans bolts.
Reply




All times are GMT -5. The time now is 01:44 PM.