need a vacumn hose diagram for a 86 turbo II...please help
#1
Junior Member
Thread Starter
Join Date: May 2003
Location: illinois
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
need a vacumn hose diagram for a 86 turbo II...please help
im still tryimg to get my 86T2 running correctly..ive been using the haynes manual as a hose diagram but it might as well be written in japan because it dosnt help for sh*t...i got the passanger side hooked up somewhat right because now my boost guage works but the car still idles at 2500rpm and has no power..it drives but its way to weak..i know it should be faster so is it possible for anyone to scan a factory vacumn hose diagram for the above car so i can finish hooking it up correctly?
#2
Senior Member
Join Date: Feb 2001
Location: Moncks Corner, SC
Posts: 409
Likes: 0
Received 0 Likes
on
0 Posts
#3
FC Mobsta
you can look at the fsm from www.teamfc3s.com as well...
#4
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
Sooooooooooo.....someone out there cac actually follow the line that feeds the fpr to the fpr solenoid and back to the fpr???? Really? Kinda dark, black and undefined in those shadowy areas of the jpg. Just curious if anybody can actually follow a line from one end to the other.
#5
Junior Member
Thread Starter
Join Date: May 2003
Location: illinois
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
that picture is whats in the haynes manual..i cant follow that for sh*t...i got the turbo side of the motor correct and my boost guage now works but everything else on that diagram is to hard to understand/follow...i need to see the factory service manual or a few pictures of someones stock t2 so i can just look off of that and copy it to my car
Thread
Thread Starter
Forum
Replies
Last Post
streetlegal?
New Member RX-7 Technical
13
03-17-22 02:46 PM
Frisky Arab
2nd Generation Specific (1986-1992)
13
08-18-15 05:30 PM