Need spec for the oil/coolant for the turbo...
#1
Full Member
Thread Starter
Join Date: Oct 2002
Location: San Jose, CA
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
Need spec for the oil/coolant for the turbo...
What are the sizes for the oil and coolant line for the turbo? Also, what are the thread sizes for the fittings? I will be getting some braided hoses too so if they are different please post them as well. TIA.
#2
W. TX chirpin Monkey
Join Date: Sep 2001
Location: Mesquite, TX
Posts: 2,684
Likes: 0
Received 0 Likes
on
0 Posts
um the hoses are attached to brackets so forget the threading on them. check out your hoses and you'll see what i mean. What exactly are you trying to do?
#6
just dont care.
iTrader: (6)
you're probably going to have to pull those lines off of a turbo car man. there is a spot on the front of the NA block for the big oil line, the one with the flex pipe on it.
it uses two flat flanges that bolt together like exhaust flanges so it would be a little tough to get some other kind of connection fabbed up i would think.
just take them off of a turbo2 in a junkyard or see if you get buy some from someone on the forum.
it uses two flat flanges that bolt together like exhaust flanges so it would be a little tough to get some other kind of connection fabbed up i would think.
just take them off of a turbo2 in a junkyard or see if you get buy some from someone on the forum.
Thread
Thread Starter
Forum
Replies
Last Post
edgars95rx7
Link Vi-PEC
0
10-01-15 01:59 PM
joel(PA)
Race Car Tech
0
10-01-15 10:25 AM