2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

need some help!

Thread Tools
 
Search this Thread
 
Old Feb 24, 2009 | 05:36 PM
  #1  
kenneth oberg's Avatar
Thread Starter
rx7 heaven
 
Joined: Nov 2008
Posts: 24
Likes: 0
From: manchster n.h.
need some help!

my 87 tII has a slight boging issue when i hit 3000rpms but it doesn't bog when i accelerate or deccelerate only when the pedel is barely down,im thinking it might be my secondary fuel injectors but im not sure any idears ?
Reply
Old Feb 25, 2009 | 03:02 AM
  #2  
mazdaracer78's Avatar
wankel head
Tenured Member 05 Years
 
Joined: May 2004
Posts: 148
Likes: 0
From: hamptonroads
VA hmmm...

you may be on the right track. if so, try a wide band o2 on it...
Reply
Old Feb 25, 2009 | 03:43 PM
  #3  
Chuck's Avatar
Senior Member
Tenured Member 10 Years
iTrader: (2)
 
Joined: Mar 2004
Posts: 690
Likes: 0
From: Charlottesville, VA
A couple of thoughts for you to consider...
- In the future, don't title your threads like you did this one. You'll get more help if you use a descriptive title instead of I need help.
- What you've described could be nothing more than an out of adjustment TPS. The TPS is sending its signal to the ECU at part throttle and decel. Make sure the TPS is correctly adjusted to 1 volt at warm engine idle. Then go and set the idle speed to 750. Make sure you short the Initial set connector before you make these adjustments. I'd do this before I start worrying about injectors.

Now, if your injectors haven't been cleaned in a long time, you might want to do that too. IMHO
Reply




All times are GMT -5. The time now is 12:51 PM.