Need a Rotary mech. in el paso to help me finish up my swap
#1
Full Member
Thread Starter
Need a Rotary mech. in el paso to help me finish up my swap
So basically I did a swap about 1 1/2 to 2 years ago got deployed forgot where I was at in the swap the motor is entirely in just need to button up the fuel pump and starter to have all parts replaced but everytime i turned it over the motor would not crank so I need a more knowledgable rotary guy to look it over. so if you know your sh*t I while gladly throw some cash your way for some help Im in el paso tx not sure if their are many rx guys around here. Any help would be great!!
#2
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
If the motor turns over,it Cranks.
If it rolls over(cranks) and doesn't Start then that is a different story.
If the engine is not getting power,try following the positive wire to the Engine fuse box.There is a small black wire that needs power to "engage everything".
It has a single clip on it,attaching the positive to the Fuse block.
If it rolls over(cranks) and doesn't Start then that is a different story.
If the engine is not getting power,try following the positive wire to the Engine fuse box.There is a small black wire that needs power to "engage everything".
It has a single clip on it,attaching the positive to the Fuse block.
Thread
Thread Starter
Forum
Replies
Last Post
Azevedo
Other Engine Conversions - non V-8
26
03-01-19 09:19 PM