need a high flow cat to replace presilencer
#1
OneThreeRotary
Thread Starter
Join Date: May 2006
Location: Vermont
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
need a high flow cat to replace presilencer
So i have the racingbeat REV II Complete Exhaust... which has a presilencer and two mufflers... thats it.... well i went to get it inspected and this year the guy notices... so what i need is a highflow cat to put in the place of the presilencer so i can get it inspected... then i can pull it off... so any place i can get a highflow thats pretty long... under $130... and would not rob mme of power if i decide to keep it???
PLEASE i need Something!!!!
PLEASE i need Something!!!!
#5
OneThreeRotary
Thread Starter
Join Date: May 2006
Location: Vermont
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
my car is a turbo.... the one they have is for the N/A... would that matter.... plus its $250... all i will need it for is a day.... any stock main converters anyone selling that way i can cut and weld it to fit????
#6
Senior Member
Join Date: Jul 2003
Location: Wayne, NJ 07470
Posts: 416
Likes: 0
Received 0 Likes
on
0 Posts
I built mine from a JC Whitney cat. Just buy the biggest one you can afford.
My local Midas actually welded it up and installed it for me. Their only screw-up was that they cut the air injection port from my presilencer instead of from the junk stock cat that was sitting in the hatch.
Never had a cat related emissions problem since then.
My local Midas actually welded it up and installed it for me. Their only screw-up was that they cut the air injection port from my presilencer instead of from the junk stock cat that was sitting in the hatch.
Never had a cat related emissions problem since then.
#7
Full Member
Join Date: Mar 2001
Location: Rivervale, NJ, USA
Posts: 198
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 87_RX7_fc3s
my car is a turbo.... the one they have is for the N/A... would that matter.... plus its $250... all i will need it for is a day.... any stock main converters anyone selling that way i can cut and weld it to fit????
Actually I may be moving out to CA, I was thinking of getting the Bonez performace cat and premanently replacing the presilencer in my RB turbo-back. Only thing is I'm not sure whether I have the early or late RB turbo back, and I'm not sure how to tell the difference.
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM
msilvia
3rd Generation Specific (1993-2002)
28
04-14-16 12:58 PM