2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

need help on my fuel lines!!!!!!

Thread Tools
 
Search this Thread
 
Old May 23, 2006 | 08:55 AM
  #1  
2RotorRacing's Avatar
Thread Starter
Crazy Carcus
Tenured Member 05 Years
 
Joined: Oct 2005
Posts: 50
Likes: 0
From: Tennessee
need help on my fuel lines!!!!!!

i have a j-spec s5 motor i need to know where they go on the motor from left to right i know the one in the center is my canester line right? plz help........
Reply
Old May 23, 2006 | 01:04 PM
  #2  
rotorforce's Avatar
I'm back Bishes
Tenured Member 10 Years
 
Joined: Jan 2006
Posts: 1,241
Likes: 0
From: Rhode Island
The fuel rails on a j-spec are lined up opposite to the usdm. It's a matter of attaching them to the inlets which face the fire wall vs the front of the engine. The line with the fuel filter
attached is your inlet which goes to the primary rail, and the other line runs from your secondary fuel rail on the FPR side.

BTW there are only two fuel lines, if these are even what you are referring to.
Reply
Old May 23, 2006 | 06:24 PM
  #3  
2RotorRacing's Avatar
Thread Starter
Crazy Carcus
Tenured Member 05 Years
 
Joined: Oct 2005
Posts: 50
Likes: 0
From: Tennessee
yes thank you i know there is only two !!!
Reply
Old May 24, 2006 | 01:58 PM
  #4  
RRTEC's Avatar
Rotartist
Tenured Member 10 Years
iTrader: (13)
 
Joined: Sep 2003
Posts: 7,252
Likes: 2
From: Spring Hill TN 37174
On a US spec which line is which?
Reply
Old May 24, 2006 | 04:00 PM
  #5  
rotorforce's Avatar
I'm back Bishes
Tenured Member 10 Years
 
Joined: Jan 2006
Posts: 1,241
Likes: 0
From: Rhode Island
Originally Posted by 2RotorRacing
yes thank you i know there is only two !!!
Then what exactly is your question? You mentioned canister are you referring to the charcoal canister? If so that has nothing to do with fuel lines.
Reply
Old May 24, 2006 | 05:25 PM
  #6  
2RotorRacing's Avatar
Thread Starter
Crazy Carcus
Tenured Member 05 Years
 
Joined: Oct 2005
Posts: 50
Likes: 0
From: Tennessee
no **** i was asking what what is the return and what is the supply...what one is the right one and what one is the left one.....but i figured it out now so dont worry about it ROTORFORCE!!!!!!!!!!!!
Reply
Old May 24, 2006 | 06:55 PM
  #7  
rotorforce's Avatar
I'm back Bishes
Tenured Member 10 Years
 
Joined: Jan 2006
Posts: 1,241
Likes: 0
From: Rhode Island
Originally Posted by 2RotorRacing
no **** i was asking what what is the return and what is the supply...what one is the right one and what one is the left one.....but i figured it out now so dont worry about it ROTORFORCE!!!!!!!!!!!!
PM sent
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM




All times are GMT -5. The time now is 04:36 AM.