Need help with heater problem
11-21-04, 12:51 AM
#1
Need help with heater problem
My car=87 tii. The heater doesnt work. No heat what so ever. The heater core doesnt seem to be blocked because the coolant lines are still there. Also the air controls have been relocated to the glovebox, im not sure if thats the problem. What color wire controls the heat? also what else should I check for. LMK thx
11-21-04, 01:34 AM
#2
Rotary Enthusiast
iTrader: (9)
Join Date: Jun 2003
Location: west
Posts: 1,191
Likes: 0
Received 0 Likes
on
0 Posts
It could be just a bad logicon or if you re-loacted it and spliced the wires that could be it. Check the wiring diagram.
When you move the temperature control, can you see/hear the actuator arm move?
When you move the temperature control, can you see/hear the actuator arm move?
11-21-04, 10:51 AM
#5
Former Moderator. RIP Icemark.
I don't want to buy a shop manual for my car, is there a place where I can still find out the information from one
Shop manuals for both series can be found on-line at:
http://www.cochran-racing.com/FSM/index.html
http://slackerware.dynu.com/fsm/
http://208.62.166.66:82/guest/shop_manuals/
or (86-88)
http://www.teamfc3s.org/main/factor...nual/1986_1988/
and (89-91)
http://www.teamfc3s.org/main/factor...nual/1989_1991/
Shop manuals for both series can be found on-line at:
http://www.cochran-racing.com/FSM/index.html
http://slackerware.dynu.com/fsm/
http://208.62.166.66:82/guest/shop_manuals/
or (86-88)
http://www.teamfc3s.org/main/factor...nual/1986_1988/
and (89-91)
http://www.teamfc3s.org/main/factor...nual/1989_1991/
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM
risingsunroof82
1st Generation Specific (1979-1985)
8
09-07-15 01:11 PM