breezetime

hello all, I have just had new rear wheel Barings put in and when the spindle was put in one of the bushings was damaged . I do not know what it is call so what bushing kit I should buy I need it ASAP it is a large one about a half dollar. so if you can help let me know thank you

jjcobm

iTrader: (18)

Are you talking about the large bushing on the spindle that has the huge 21mm head bolt going through it? That is you DTSS bushing.

https://www.rx7club.com/2nd-generation-specific-1986-1992-17/s5-convertible-tii-extras-swap-project-pictures-877625/page3/

Is it that black one in the picture i have of the rear hub? You can get a new one at mazdatrix, racing beat, MMR or ebay (PDRMOTORSPORTS, I got most of my bushings from him). The new bushing will not be rubber, it will be solid and will eliminate the rear toe steer feature, which is no big deal and alot of people prefer it eliminated.

EDIT: I forgot I got the DTSS bushings from MMR, PDR from ebay doesn't carry them....

MMR: http://mmr-direct.com/

LargeOrangeFont

iTrader: (7)

jjcobm - Put a rear sway bar on the car. The low powered N/A cars need it to rotate.

breezetime

was told I would have to get the a spindle from mazda $400 can not get just the dtss bushing ???

LargeOrangeFont

iTrader: (7)

Just get the DTSS eliminator bushings. They are $40 from MMR with free shipping and $48 from Mazdatrix. You don't want the DTSS anyway.

jjcobm

iTrader: (18)

You will want to get those bushing pressed in at a machine shop, if you don't have the proper tools.... I know the guy who did mine must of be swearing at me for giving him those to put in : )

Gurew

iTrader: (4)

ya its really not that hard to press in....