2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

Need help

Thread Tools
 
Search this Thread
 
Old 09-27-01, 05:21 PM
  #1  
Junior Member

Thread Starter
 
RX7TII's Avatar
 
Join Date: Apr 2001
Location: Corpus Christi, TX USA
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Unhappy Need help

i have the exact same car. i am having problems trying to get the car started. how much difference does it make if the injectors are in the wrong place. the reason being that i replaced the turbo gasket and lower intake i took off the fuel injectors and did not mark the primarys from the secondarys so do you think that this could be a problem. any advice would help. javier
Old 09-28-01, 02:18 PM
  #3  
HAILERS

 
HAILERS's Avatar
 
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes on 19 Posts
If you have a stock turboII the injectors should be all the same. Does not matter which hole you put them in. If it ran before tearing it apart and not now, you might check and see if the wires to each injector are shorted together at each plug or shorted to ground. If it ran before a double check of the inlet hose connections are truly good. Did it run before?
Old 09-28-01, 06:20 PM
  #4  
Junior Member

Thread Starter
 
RX7TII's Avatar
 
Join Date: Apr 2001
Location: Corpus Christi, TX USA
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
yes did run

ran great then heard what sounded like a hissing coming from lower intake it was. pulled it a part and replaced the gasket as well as the turbo gasket. put it back together and tried to start it would not the specialist told me that he thought that it was a computer. replaced the computer and did not start yet moved some wires around and the sob started. right now it looks as though their is no fuel in the top two injectors because pulled them today and the injectors are bone dry pulled them off of the main fuel line and man is it filled with gas.
Old 09-30-01, 10:21 PM
  #5  
Full Member

 
Andy's Avatar
 
Join Date: May 2001
Location: Hamilton,Ontario,Canada
Posts: 60
Likes: 0
Received 0 Likes on 0 Posts
I had a similar problem earlier this summer. One of the plugs on the wiring harness for the primary injectors was dead. If you can get your hands on the wiring harness plug diagram you can check the wiring. Have you ever had the injectors cleaned? Did you change your fuel filter? I had to replace my ECU too so don't feel like you wasted the money.
Also the secondary injectors don't come on until 3500 rpm or so, so they would be dry.
Old 10-01-01, 08:31 PM
  #6  
Junior Member

Thread Starter
 
RX7TII's Avatar
 
Join Date: Apr 2001
Location: Corpus Christi, TX USA
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
thanks

well i am about to get the injectors cleaned and check to make sure that they are pulsating with a noide light. no i have never changed the fuel filter.




All times are GMT -5. The time now is 09:16 PM.