2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Need To Get/Open the Trunk to My Vert Help Needed Thanks

Thread Tools
 
Search this Thread
 
Old Oct 28, 2011 | 01:26 AM
  #1  
teddyrx2's Avatar
Thread Starter
One Luv "Till The End"
Tenured Member 15 Years
iTrader: (33)
 
Joined: Mar 2006
Posts: 13,757
Likes: 0
From: san diego
Angry Need To Get/Open the Trunk to My Vert Help Needed Thanks

I had my vert parked on base, somebody broke into the trunk of my vert, stole my craftman tools.
  • The key to the trunk goes in and out fine
  • The key turns to the left and right fine
  • Problem, the key turns to the left and right but does not unlock the trunk
What I' am thinking is that the little plastic piece that jiggles the rod to the left and right is broken, can I get to the trunk to unlock from inside of the car?

I want to get it open so I can put some parts in there to take to seven stock on October 29th to sell, and most important fix the trunk lock...

any help any ideas would be greatly appriciated thanks
Reply
Old Oct 28, 2011 | 02:46 AM
  #2  
Rx7Ridah's Avatar
Senior Member
Tenured Member 15 Years
iTrader: (8)
 
Joined: Nov 2003
Posts: 533
Likes: 0
From: Green Bay
Will the cable release still work?
Reply
Old Oct 28, 2011 | 03:29 AM
  #3  
Panda86's Avatar
Full Member
iTrader: (1)
 
Joined: Oct 2011
Posts: 196
Likes: 1
From: Under the seven
Get a boot to hop in the trunk with a torch and watch the mech. Or download the chassis manual and look at how exactly the lock mech works and figure out where the problem is.

On my coupe I had a stretched cable, easy fix slip a cable tie collar in behind the feral to act as a spacer, done.
Reply
Old Oct 28, 2011 | 05:35 AM
  #4  
teddyrx2's Avatar
Thread Starter
One Luv "Till The End"
Tenured Member 15 Years
iTrader: (33)
 
Joined: Mar 2006
Posts: 13,757
Likes: 0
From: san diego
Cable is not working...

Panda I got your pm thanks
Reply
Old Oct 28, 2011 | 10:24 AM
  #5  
Rob XX 7's Avatar
FC guy
Tenured Member 20 Years
iTrader: (8)
 
Joined: Oct 2002
Posts: 8,713
Likes: 17
From: Long Island, New York
you MAY be able to push the plastic liner into the trunk from inside the car, I know you can push it but what im getting at is it might end up cracking so try to push it near the ends were the clips are. From there you can reach in and remove the plastic along the back of the trunk and manually release the trunk from inside.

I had to do this once but it was over 10 years ago so im a little foggy but I definitely pulled it off.
Reply
Old Oct 29, 2011 | 12:09 AM
  #6  
teddyrx2's Avatar
Thread Starter
One Luv "Till The End"
Tenured Member 15 Years
iTrader: (33)
 
Joined: Mar 2006
Posts: 13,757
Likes: 0
From: san diego
I got the trunk open from inside the car by reaching to the back. Got the trunk popped, and the little plastic piece that holds the rod to twist and unlock the trunk is partially broken. I sprayed some pb blaster to free up some of the rust, and get the parts moving free...So for now it will work just for seven stock, and then back in the garage she goes...

Thank you guys...I left a 300 piece craftmans tool box in the trunk they took a majority of the tools and left some scattered in the trunk hahahaha...

Thanks guys
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
astrum
2nd Generation Specific (1986-1992)
24
Nov 15, 2017 08:44 AM
CynicalGambit
New Member RX-7 Technical
0
Aug 17, 2015 10:41 PM




All times are GMT -5. The time now is 02:20 AM.