Hey guys, I took the four wires out of the connector back at the fuel tank and I just need to know which goes where, I figured the black goes to black and black/white goes to blue, but does the red go to the red/white and the other one go to the red and green or vice versa?
Thanks

 

Check the FSM section 50. Wiring Diagrams...

 

I already have a ton of wiring diagrams and a haynes manual, the problem is they specify the wire colors from the point that the pump plugs into the other harness.

 

your not reading the right one, or your reading it wrong then, they information should be there.

 

FSM does not show the pigtail wires on the pump itself. Just the wires on the chassis half of the connector.

So, if you have not removed any wires from either connector, then just connect them together.

So the question arises: Is that the case? you have the wires out of the connectors?