Need different plugs for NA and TII TB mod?
10-31-06, 07:00 PM
#1
Need different plugs for NA and TII TB mod?
So I took out the double throttle plates in my TB a while back and I finally got around to trying to tap out the holes to put in the plugs. To my suprise, the 1/8 NPT tap fit complete into the hole with no problems. I guess this means that the holes are a substanitally larger diameter than that of the TII. So my question is what have other people used?
Edit: the 10/1.25 tap I have is also too small. I have a small cheapo tap set, so the only 12mm's it has is a 12x1.5 and 12x1.75. I guess I'll go down to the home depot and see if they have a 12x1.5 plug I can use.
Edit: the 10/1.25 tap I have is also too small. I have a small cheapo tap set, so the only 12mm's it has is a 12x1.5 and 12x1.75. I guess I'll go down to the home depot and see if they have a 12x1.5 plug I can use.
Thread
Thread Starter
Forum
Replies
Last Post