need bigger turbo
Thread Starter
Full Member
Joined: Feb 2004
Posts: 157
Likes: 0
From: just south of hell
need bigger turbo
NEED HELP WITH TURBO HAVE A VERT WITH STREET PORT STAND ALONE ALUM RAD FMIC MOTOR HAS 20K MILES ON IT TURBO NEEDS TO BE REPLACED WANT TO RUN BIG TURBO NOTHING SMALLER THAN 60-1 WANT MORE TOPEND THAN LOWEND
777** The Anti-rice
Joined: Sep 2002
Posts: 2,100
Likes: 0
From: Seattle, WA
Re: need bigger turbo
Originally posted by fc313bt88
NEED HELP WITH TURBO HAVE A VERT WITH STREET PORT STAND ALONE ALUM RAD FMIC MOTOR HAS 20K MILES ON IT TURBO NEEDS TO BE REPLACED WANT TO RUN BIG TURBO NOTHING SMALLER THAN 60-1 WANT MORE TOPEND THAN LOWEND
NEED HELP WITH TURBO HAVE A VERT WITH STREET PORT STAND ALONE ALUM RAD FMIC MOTOR HAS 20K MILES ON IT TURBO NEEDS TO BE REPLACED WANT TO RUN BIG TURBO NOTHING SMALLER THAN 60-1 WANT MORE TOPEND THAN LOWEND
I wanta be with the BUC!
Joined: Jan 2003
Posts: 2,305
Likes: 0
From: Knoxville, TN
OK so you want a larger turbo on you turbo vert?
Well what do you have now? Stock? If so then you can upgrade the stock one with a 60-1 trim intake. But that is hard on the shaft, and it may break.
Or if you have alot of money You can buy a custom turbo manifold, and get it flanged for a turbo you want, and then get a new turbo to fit it. But unless you already did all the supporting fuel mods to your car, you can't just slap it on. I'm sure you know that...
Well what do you have now? Stock? If so then you can upgrade the stock one with a 60-1 trim intake. But that is hard on the shaft, and it may break.
Or if you have alot of money You can buy a custom turbo manifold, and get it flanged for a turbo you want, and then get a new turbo to fit it. But unless you already did all the supporting fuel mods to your car, you can't just slap it on. I'm sure you know that...
he is asking what would be the best turbo for high end power and he is not really to conserned with low end speed. Why, I don't know I would rather both. Anyways this is a good question because I have no idea 
Trending Topics
I wanta be with the BUC!
Joined: Jan 2003
Posts: 2,305
Likes: 0
From: Knoxville, TN
What you can put like a T98!
RETed is right, if you want alot of high end power with no low end (also known as a dyno quen) Just put a HUGE turbo that spools at like 5 grand, and then just puts out outragious boost levels!
RETed is right, if you want alot of high end power with no low end (also known as a dyno quen) Just put a HUGE turbo that spools at like 5 grand, and then just puts out outragious boost levels!
Re: need bigger turbo
Originally posted by fc313bt88
NEED HELP WITH TURBO HAVE A VERT WITH STREET PORT STAND ALONE ALUM RAD FMIC MOTOR HAS 20K MILES ON IT TURBO NEEDS TO BE REPLACED WANT TO RUN BIG TURBO NOTHING SMALLER THAN 60-1 WANT MORE TOPEND THAN LOWEND
NEED HELP WITH TURBO HAVE A VERT WITH STREET PORT STAND ALONE ALUM RAD FMIC MOTOR HAS 20K MILES ON IT TURBO NEEDS TO BE REPLACED WANT TO RUN BIG TURBO NOTHING SMALLER THAN 60-1 WANT MORE TOPEND THAN LOWEND
Thread Starter
Full Member
Joined: Feb 2004
Posts: 157
Likes: 0
From: just south of hell
i have 1600cc sec. injectors wal. 225 pump that will be upgraded along with 2 more injectors was concidering a t76 w/ hks manifold i also have 88 t2 that will be set up for drag thats why i want topend more than lowend does anyone run a t76 on a fc i would like to know the setup and how it runs
Thread
Thread Starter
Forum
Replies
Last Post
immanuel__7
2nd Generation Specific (1986-1992)
89
Sep 5, 2015 10:23 AM
josef 91 vert
2nd Generation Specific (1986-1992)
23
Sep 3, 2015 11:20 AM
