In need of an 88 T2 motor, yall
Thread Starter
Joined: Apr 2001
Posts: 632
Likes: 0
From: Austin, TX; JABLAM!, WA; Iraq
In need of an 88 T2 motor, yall
I was wondering if anyone in the forum knows of a place in the Austin/central texas area that I can get a 1988 T2 motor. Have found several out of state, but I am doing a little bit of comparison shopping and would like to get the motor without having to pay truck freight
Last edited by Poindexter10thae; Aug 27, 2001 at 11:28 PM.
HyperREV.com
Joined: Mar 2001
Posts: 1,162
Likes: 0
From: Oregon
yea, thanks for asking vaughnc.
okay to start out i replaced my stock turbo with another after the previous owner had something flied into it.
i replaced it with another stocker, and thought i put everything back on correctly, still sure i am
....
anyways i go to start it after checking everything over and it starts but makes a popping sound lke pop pop really faint like a lawnmower and shuts off. i do it again same thing.
ive asked on the teamfc3s board and they say its a vacuum leak. and it seems like it too cause the car died. the thing i dont understand as usually when i have a vacuum leak the car doesnt make any noises it just sputters and dies. this leak or whatever it was made a tin can kind of sand like pop pop pop?
im stuck, they said check the afm to see if it is plugged in i ended up unscrewing it though and accidentally pulled it out of the solder points. i tried to reconnect em, thought i did.
went to start it, and now it just cranks but doesn't turn over.
man
thanks in advance
brandon
okay to start out i replaced my stock turbo with another after the previous owner had something flied into it.
i replaced it with another stocker, and thought i put everything back on correctly, still sure i am
....anyways i go to start it after checking everything over and it starts but makes a popping sound lke pop pop really faint like a lawnmower and shuts off. i do it again same thing.
ive asked on the teamfc3s board and they say its a vacuum leak. and it seems like it too cause the car died. the thing i dont understand as usually when i have a vacuum leak the car doesnt make any noises it just sputters and dies. this leak or whatever it was made a tin can kind of sand like pop pop pop?
im stuck, they said check the afm to see if it is plugged in i ended up unscrewing it though and accidentally pulled it out of the solder points. i tried to reconnect em, thought i did.
went to start it, and now it just cranks but doesn't turn over.
man
thanks in advance
brandon
knowledge junkie
Joined: Mar 2001
Posts: 5,595
Likes: 6
From: Atlanta, GA
Since I'm not a mechanic, I started a new thread for you here:
https://www.rx7club.com/vforums/show...threadid=21047
You might also try posting to your south rx7 club or this site's tech forum.
https://www.rx7club.com/vforums/show...threadid=21047
You might also try posting to your south rx7 club or this site's tech forum.
Thread
Thread Starter
Forum
Replies
Last Post