airmech1

Just a quick question. I'm going to send my injectors for cleaning and would like to know which seals I need to reinstall them, just want to have them ahead of time. I think they my come back with some new ones? thanks

farberio

iTrader: (7)

Mine came back with new ones, I am sure they all do.

SirCygnus

iTrader: (1)

ditto. plus, new seals are cheap enough and they are always good to have around.

need RX7

iTrader: (4)

Yeah mine came with new ones too. If yours don't however, you can get them here: http://www.mazdatrix.com/c-6.htm

misterstyx69

iTrader: (142)

where are you sending them?
Get a hold of "the Guy" (I like KGparts they Rock!) you are sending them to and ask for new seals,and they can be sent back to you along with your Clean injectors and Bammo!,install them Freshhhhh!

arghx

iTrader: (3)

well wait a minute. What seals are you talking about? The o-rings at the top? Or the grommet that seals them to the manifold at the bottom? The grommet is an OEM piece you will need to get from Mazdatrix etc. It prevents vacuum leaks.

airmech1

I'm sending them to witchhunter. Yea I thought maybe there was some I should replace on the lower end thanks arghx

need RX7

iTrader: (4)

Witch Hunter did mine and they came with all new seals.

Morphine

I just got through replacing some leaky injecter seals today. I got the parts from NAPA because its close to my house and assumed it would be cheaper than the OEM Mazda ones. Of course, they had to order them and it took 2 tries since they got the wrong stuff the first time.

While I was waiting for my order to come in, i popped by a Mazda dealership for giggles to see what they charged. As it turns out, the factory Mazda ones were like 1/2 the price of the NAPA ones. Too bad I pre-paid for my order!

Oh well...they are installed, running, and no leaks. I can't complain too much.