No kidding, for about what 400 and some welding, damn! That is some nice work. I know if more people do it, its only going to get better. Crap can anyone lend me 400 dollars?
|
Nice.
Of course some one figures out a cheap way to do it after I get my turbo conversion almost done ;) |
Mad Max come to mind - a little crude, but very effective.
|
here are some answers to some questions you guys had
The m90 is off of a t-bird, the m-90 from a grand prix has part of the intake cast onto the s/c and it is way too big The engine pad i am talking looks something like this red-the actual bracket coming from the engine(made out or aluminum black-the actual round (steel) pad that sits on a rubber stub or like a pilliar blue-is the bolt attaching the pad to the engine bracket brown- is a peice of 3/8" steel i welded to the pad, the rest of the upper bracket is welded to this peice green- is where i welded on the backside of the pad , in the crease where the pad and steel peice meet yellow- yellow is where i welded on top of the pad does this pic help at all? The pulley i had machined at a place where they rebuild electric motors. I went there because since the s/c has a straight shaft just like electric motors and not a tapered one i figured he could set me up with some thing. All he had to do was drill the shaft hole out slightly and cut a different sized key into a pulley he had on hand. The piping and clamps and elbows came from a local filter shop for little to nothing |
ok, usually superchargers are placed after the throttle plates(like a picture shown on like page 6 of this thread), but i put mine before it(alot less fabing), Most cyntrifugal s/c's are piped like mine and use a bypass valve.
u need a bypass valve because when u shift , or even at idle the bypass valve opens because the throttle plates are blocking the air flow and a huge boost spike is created, The bypass valve is opened either by vacuum(when the engine is at idle) or when too much boost is created and and the excess pressure pushes open the valves plunger(shifting) At first i just wanted to use an open atmoshere blowoff valve but that would screw up my computer since it is mass air metered and at idle it would vent air to the atmosphere and not recycle it back into the system. The one bypass valve i have cant vent the excess pressure fast enough at high rpm shifts but it works perfect at idle. I plan to hook up the blow off valve i ordered with out the vacuum line attached to it so that it will only open when too much pressure is present and not at idle. If i cant get the blow off valve to work properly ill just buy another bypass valve and hook it up just like the one i have on it right now, i know two would be more than sufficient. I got the bypass valve for $12 shipped to my place off of ebay As for timing i am not worring about it since i havnt had any predetination I found the idler at my place, it is a peice of shit and an eye soar, so i have a nice new smaller one on the way |
i am seriously jealous
|
Damn only if we all had as much talent as you, RX7s would be the fastest, cheapest cars on earth!!!!
|
Not bad but it looks like there's no space..
Turbo would be my choice but supercharger must be tons of fun too..Probably a little more reliable also.. Good luck.. |
^ Ditto :D
|
Originally posted by SonicRaT Wire the VDI open once and see how it goes, as far as I am aware by design it opens up two shorter paths, and as it looks it leaves the others alone. |
Originally posted by drago86 This is not true, the air still travels the longer path, the valve just opens a shorter acoustic path for the pressure waves to travel down, opening it will just loose low end super charged or not. |
here you go here is your proof
|
one more
|
:drool:
...sweet... I'd pay for a write-up if that what it takes. Helps that you have the same year and model as me... |
Kay Dude Mad Props.. I hope u get some good numbers and just fukin piss in anyones face that says any shit to you... ur the man
|
hey yo man you want me to send you some money to fill up ur tank.. ! and send me a copy on how to do this!
|
I'd LOVE to see what this puppy does on a dyno for inclusion on my dyno page:
http://www.catenet.net/dyno.php |
Very well done man. Would love to see some dyno numbers myself. Must be a blast to drive a SC'd NA! :D
Good luck, keep info coming. later -Justin |
or just get respected and do the write up with pictures to help people out......."pay for a write up".....wtf
|
WRITE UP WRITE UP WRITE UP!!!!
|
Originally posted by Dltreezan WRITE UP WRITE UP WRITE UP!!!! |
great job dude. i was gonna do this almost exactly to my na i had in high school, but i couldnt find the t-bird sc cheap enough, then i had a little incident with a tree...glad to see i wasnt the only one with this idea..whish i could ride in it and see how i would have been...
oh well..i just built a high comp TII..which is kinda similar. oh yeah...you might wanna switch to a serpentine belt setup. you should be able to find pulleys for everything except the waterpump at a good junkyard. the waterpump you'll have to get custom made, tho. should make it all a lot simpler and more reliable/less slippage. i had a couple more suggestions, but i totally forgot em...oh well ps..all you writeup people...why? he has explained it really well, and what he has done is very simple when it comes down to it. part of the coolness of shit like this is that it takes someone with a bit of ingenuity like zach to do it. if you cant figure it out from whathe has told you already, maybe itd be better for you to not do it. takes away from the prestige of the real engineers that figure stuff out for themselves. just my .02 pat |
All I have to say is that i'm insanely impressed with your
inginuety and fabbing skills, this is definetly on my to do list when I get the time. You have to try to take some better pics or draw up something more clear to describe how you mounted it etc... MUCH PROPS MAN!!! |
If you make a good good writeup ill donate to you via paypal even if its free!
|
omfg
$300 supercharge rx-7 sweet jesus how long did the whole project took you ? |
All times are GMT -5. The time now is 01:06 PM. |
© 2024 MH Sub I, LLC dba Internet Brands