My First RX-7 - 91 Turbo
#1
Newbie
Thread Starter
Join Date: Apr 2003
Location: Franklin, MA
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
My First RX-7 - 91 Turbo
I'm going to be buying my first RX after years of admiring them and watching my friends pimp the sh*t. I'm looking at a 1991 Mazda RX7 Turbo. Wondering what the rated HP is, Torque and what I should look for before I buy it?
The car is fantastically clean inside and out, with no rust, no stains and no visible leaks. The engine has 62,500 on it, and is pretty clean.
Thx,
Newb
The car is fantastically clean inside and out, with no rust, no stains and no visible leaks. The engine has 62,500 on it, and is pretty clean.
Thx,
Newb
#3
Senior Member
Join Date: Nov 2001
Location: Spearfish, SD
Posts: 725
Likes: 0
Received 0 Likes
on
0 Posts
Sounds like you have found a gem. If it is descently priced get it! Things to look for: First of get a compression test. Then check the turbo's shaftplay and see if there is alot of oil on the charge pipe. Check for the tranny grinding when going into any gears. These are just a couple of the big problems it could have. Also look for anything that is wrong and you can use it to talk down the price.
#4
Rotary Enthusiast
Join Date: May 2002
Location: Boston
Posts: 1,203
Likes: 0
Received 0 Likes
on
0 Posts
Is it stock? If not look closely at the mods, find out if he has reciepts, and once you find out what the car has report back here and we can give you adivice on what to look for. This will help you lower the price of the car. If the car is stock then its more basic, usually when buying a car if its really clean, no rust, and drives well it means the owner takes real good care of it and this is key. If the car drives beautifly, looks clean, has little to no rust then id say your gonna be paying some good money for it but i think its worth it
#5
Newbie
Thread Starter
Join Date: Apr 2003
Location: Franklin, MA
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
The tag says 4990, but I'm sure i can knock off some bills. I'll definitely let you guys know once I take a look at it.
Thanks for all the help and advice. You guys kick some ***.
~Peace
Thanks for all the help and advice. You guys kick some ***.
~Peace
Thread
Thread Starter
Forum
Replies
Last Post
sherff
Adaptronic Engine Mgmt - AUS
9
02-24-19 12:09 PM
Turblown
Vendor Classifieds
0
08-18-15 10:01 PM