2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

my coolant sensor is not connected please help

Thread Tools
 
Search this Thread
 
Old 11-20-06, 01:35 PM
  #1  
Junior Member

Thread Starter
 
fearjigs's Avatar
 
Join Date: Jun 2006
Location: new york
Posts: 39
Likes: 0
Received 0 Likes on 0 Posts
my coolant sensor is not connected please help

I need help finding the wire that connects to the coolant sensor pics would be greatly appreciated...i think the wire is grounding out somewhere cause the lights is on and that buzzing noise is on. the guy i bought the car from must have removed it ignorantly while installing a new radiator someone pls help need to remove that annoying buzzing noise!! thank you!
I have searched!
Old 11-20-06, 02:27 PM
  #2  
Engine, Not Motor

iTrader: (1)
 
Aaron Cake's Avatar
 
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes on 91 Posts
It's a brown/white (if I remember correctly) wire on the body harness that leads from the airbox area to the radiator. On the end is a black barrel connector.
Old 11-20-06, 02:45 PM
  #3  
Junior Member

Thread Starter
 
fearjigs's Avatar
 
Join Date: Jun 2006
Location: new york
Posts: 39
Likes: 0
Received 0 Likes on 0 Posts
Is it the same color for an 88.. What can I do if the wire was cut and there's no barrel connector. I found a brown wire with blue stripes cut could that be it. Thanx for the reply I just need some further help I want to fix this problem. Thanx
Old 11-20-06, 02:54 PM
  #4  
Engine, Not Motor

iTrader: (1)
 
Aaron Cake's Avatar
 
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes on 91 Posts
I don't think it's brown/blue. The wiring diagrams can be found in the Factory Service Manual linked to in the FAQ. I'm pretty sure it's brown/white but check to be sure. If it's cut, you will need to solder on a new length of wire and then crimp a barrel connector to the end.
Old 11-20-06, 03:38 PM
  #5  
HAILERS

 
HAILERS's Avatar
 
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes on 19 Posts
Pure Brown wire to the sensor in the radiator. Brown/White from the cluster to the warning light cluster.
Old 11-20-06, 04:41 PM
  #6  
HAILERS

 
HAILERS's Avatar
 
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes on 19 Posts
I wrote that wrong. Pure brown at the sensor in the radiator.

Brown/White from the instrument cluster to the Warning Light assy.
Old 11-20-06, 05:22 PM
  #7  
Junior Member

Thread Starter
 
fearjigs's Avatar
 
Join Date: Jun 2006
Location: new york
Posts: 39
Likes: 0
Received 0 Likes on 0 Posts
thx for the help its fixed now.. no more buzzer..thx alot
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mulcryant
2nd Generation Specific (1986-1992)
10
09-09-15 05:24 PM
ZaqAtaq
New Member RX-7 Technical
2
09-05-15 08:57 PM



Quick Reply: my coolant sensor is not connected please help



All times are GMT -5. The time now is 03:27 AM.