Missing part
03-27-04, 10:35 PM
#1
Junior Member
Thread Starter
Join Date: Feb 2004
Location: Eastern Canada
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Missing part
I am not sure if I am missing the "IGN Relay" or the "EX-Hi relay" for my heater blower, previous owner threw it out after the harness caught on fire. The harness that is suppose to hook up to it, has 4 wires, red with yello strip, blue with white strip, blue with white strip and I think a yellow(this one totally melted off) I think this is the Ex-Hi relay that is missing adn I am hoping this is why my blower isn't working right too.
Any one know which one I am missing?
Any one know which one I am missing?
03-28-04, 02:13 AM
#2
Always something...
Join Date: Aug 2002
Location: Atlanta, Ga USA
Posts: 944
Likes: 0
Received 0 Likes
on
0 Posts
What year is your RX-7? Have you checked any of the wiring diagrams which are available online? I'd check mine for you right now but I am freakin' exhausted and just came in from working on my car, so do a little searching and you'll find the answer, or someone else will post it, or when I return and check this thread after I get some rest I'll go look in my manual. I can only help if its an S5 (89-91, read the FAQ in this forum if you aren't familiar with these designations), S4's I don't have the manual for.
03-28-04, 02:10 PM
#3
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
That be the air conditioning Main Relay the dummy threw away.
That sucker is located up front to the left, in front of the radiator along with a few other relays.
That sucker is located up front to the left, in front of the radiator along with a few other relays.
Last edited by HAILERS; 03-28-04 at 02:15 PM.
03-28-04, 09:42 PM
#4
Junior Member
Thread Starter
Join Date: Feb 2004
Location: Eastern Canada
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for diagram, that helps, I have this diagram, but I couldn't read it, it was a bad scan, I will check tomorrow but I think it is the Ex-HI relay, the one I am missing is right down by my the heater blower, all on the same wiring as the heater relay.
I have a FC (87 GX)
Where is the IGN Relay located?
Is the blower resistor and power transistor the two that are attached to the top, back of the blower box?
I have a FC (87 GX)
Where is the IGN Relay located?
Is the blower resistor and power transistor the two that are attached to the top, back of the blower box?
03-28-04, 10:34 PM
#6
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
My mistake:
I'll take a look tomorrw .....maybe. This jpg and others are not all encompassing when it comes to the heater/air cond. I failed miserably several years ago at fixing my low fan speed. I changed everything but what was needed. I finally bought the fan housing and it all worked ok since. It was my misunderstanding where and what the Power Resistor and the Blower Resistor were. It was the Power Resistor that was bad on mine. Mounted on the top of the box/housing. I know your problem is another thing though.
I'll take a look tomorrw .....maybe. This jpg and others are not all encompassing when it comes to the heater/air cond. I failed miserably several years ago at fixing my low fan speed. I changed everything but what was needed. I finally bought the fan housing and it all worked ok since. It was my misunderstanding where and what the Power Resistor and the Blower Resistor were. It was the Power Resistor that was bad on mine. Mounted on the top of the box/housing. I know your problem is another thing though.
Last edited by HAILERS; 03-28-04 at 10:39 PM.
Thread
Thread Starter
Forum
Replies
Last Post
