misfire + white smoke
#1
Full Member
Thread Starter
Join Date: Nov 2007
Location: belgium
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
misfire + white smoke
problem: engine misfires at WOT and won't make boost, when I took the oil filler cap of there was white smoke comming out of it and there's also white smoke comming out of my exhaust.
Did a compression test on a cold engine (because it would'nt start yesterday):
front rotor : 100-105 psi , rear rotor : 105-110 psi looks like a healty engine.
Tps was broken so I put another one in but when i adjusted the thottle body to have the correct impedance @ idle, the voltage on the ecu where way of and the engine wouldn't start, so i adjusted the tps so the voltages where @ 0.8 and 1V and the engine started but rpm was @ 1800.
Has anyone had this problem before?
Did a compression test on a cold engine (because it would'nt start yesterday):
front rotor : 100-105 psi , rear rotor : 105-110 psi looks like a healty engine.
Tps was broken so I put another one in but when i adjusted the thottle body to have the correct impedance @ idle, the voltage on the ecu where way of and the engine wouldn't start, so i adjusted the tps so the voltages where @ 0.8 and 1V and the engine started but rpm was @ 1800.
Has anyone had this problem before?
Thread
Thread Starter
Forum
Replies
Last Post
frosty1993
General Rotary Tech Support
3
09-30-15 01:27 PM