manual to power windows?
02-25-02, 11:15 PM
#1
Full Member
Thread Starter
Join Date: Oct 2001
Location: san diego
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
manual to power windows?
Has anyone switched from manual to power windows? I was wondering if it was easy to do and if anyone ran into any problems? I need info/diagrams on how to do it... any info would be helpful. Thnx
02-26-02, 01:02 AM
#2
I Raise Chickens
its possible, just very difficult. Both switches are on the same circuit, so they have be wiring up correctly or else she no work. Youd have to change alot, new window regulators, switches, door panels. Id keep the roll ups if it were me.
02-26-02, 06:58 AM
#4
Seduced by the DARK SIDE
Join Date: Apr 2001
Location: Orange Park FL (near Jax)
Posts: 7,323
Likes: 0
Received 2 Likes
on
2 Posts
My origonal elec door got bashed in a parking lot. I bought a manual door and swapped in the elec window.
You will need all the plastic nuts and the elec door harness. The door steel fits both, but all the trim changes.
You will need all the plastic nuts and the elec door harness. The door steel fits both, but all the trim changes.