Main fuse
Main fuse
Do you think an automotive store would carry the 80 A main fuse? Or would I have to get that specifically from a Mazda dealership?
Also, how would I go about switching the fuse as you can't just pull it out..
Also, how would I go about switching the fuse as you can't just pull it out..
Last edited by hybridphil; Oct 28, 2006 at 10:48 PM.
there should be two screws holding the fuse in. I don't remember where it goes but you might be able to see it from the side or the bottom of the box. You can take the fuse box out to get to it if you are not able to get to it.
You can get to the bolts with the fuse box in the car. It makes it easier anyways because you don't have to hold the fuse box in place when using the wrench.
IIRC, there's 2 10mm bolts on one side, and 1 10mm bolt on the other side. There's little plastic "doors" you open up (slide down?) to see them. Mine are broken off so that's not a problem...
IIRC, there's 2 10mm bolts on one side, and 1 10mm bolt on the other side. There's little plastic "doors" you open up (slide down?) to see them. Mine are broken off so that's not a problem...
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
Oct 17, 2020 03:25 PM
FC3S Timmy
2nd Generation Specific (1986-1992)
16
Oct 3, 2015 01:08 AM



