LSD swap plz help
Thread Starter
fc
Joined: Sep 2008
Posts: 80
Likes: 0
From: bay area
LSD swap plz help
so i have a 87 4 lug rx7 that i am tryin to swap out for a tII lsd but when i go to line it up the two rear mounts fit but the one that bolts to the subframe the two studs off the diff dont wanna line up wit the slots any suggestions?
BFH.
it should be a straight swap, the chassis are the same. You may need to go straight up instead of an angle.
You will need turbo axles and a different drive shaft if the rest of your drive train is NA
it should be a straight swap, the chassis are the same. You may need to go straight up instead of an angle.
You will need turbo axles and a different drive shaft if the rest of your drive train is NA
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
gabescanlon
3rd Generation Specific (1993-2002)
2
Sep 15, 2015 06:57 AM