Lowering Spring question?
03-01-04, 03:36 PM
#1
Full Member
Thread Starter
Join Date: Mar 2003
Location: Winnipeg Manitoba
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
Lowering Spring question?
I plan on ordering a set in the next few days.
im looking at RB, Eibach, And intrax. Im just curious if any of those are crappy and i should look a different way.
thanks
im looking at RB, Eibach, And intrax. Im just curious if any of those are crappy and i should look a different way.
thanks
03-01-04, 08:30 PM
#3
REINCARNATED
iTrader: (4)
My current set-up :
Tokico HP's (Blues)
Eibach progressive kit, cut 2 dead coils off each rear spring
Mazdatrix front upper perch lowering kit.
I'd say over a bone stock set-up the improvement with these money friendly upgades is 70% better than stock and 30% short of what it could be with (full coil-overs)
Racing beat and Eibach are both very good company's. Santiago is correct about intrax, they are cheap, untested units. RB and E. are both race proven and track tested. Only one thing that differs is the Eibach units are progressive.
Good luck,
-Markus Reschny
www.mazsport.net
Tokico HP's (Blues)
Eibach progressive kit, cut 2 dead coils off each rear spring
Mazdatrix front upper perch lowering kit.
I'd say over a bone stock set-up the improvement with these money friendly upgades is 70% better than stock and 30% short of what it could be with (full coil-overs)
Racing beat and Eibach are both very good company's. Santiago is correct about intrax, they are cheap, untested units. RB and E. are both race proven and track tested. Only one thing that differs is the Eibach units are progressive.
Good luck,
-Markus Reschny
www.mazsport.net
Thread
Thread Starter
Forum
Replies
Last Post
MILOS7
3rd Generation Specific (1993-2002)
7
08-25-15 07:37 PM