low imp car, bough high imp rtek..need help searched...
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: Nov 2005
Location: pueblo
Posts: 346
Likes: 0
Received 0 Likes
on
0 Posts
low imp car, bough high imp rtek..need help searched...
ok so i bough a rtek that is for high imp injectors, and my car is low imp. i searched but could not find if you need resistors to go this way?
im so confused
thanks
scot
im so confused
thanks
scot
#2
rotorhead
iTrader: (3)
There is no low impedence or high impedence Rtek. There are no low impedence or high impedence ECU's. The difference in the low impedence and high impedence s4's is simply the engine harness (your 87 has a factory resistor pack for its low impedence injectors). The 87 ECU (N332) and 88 ECU (N333) are essentially interchangeable.
If you have an 87 T2 with low impedence injectors and your stock resistor pack is working fine, it doesn't matter if you have an Rtek 1.7, an N332 ECU, or an N333 ecu.
If you have an 87 T2 with low impedence injectors and your stock resistor pack is working fine, it doesn't matter if you have an Rtek 1.7, an N332 ECU, or an N333 ecu.
Thread
Thread Starter
Forum
Replies
Last Post
immanuel__7
2nd Generation Specific (1986-1992)
89
09-05-15 10:23 AM