2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

and the lord said: "let there not be anymore radio signal!"

Thread Tools
 
Search this Thread
 
Old Nov 2, 2009 | 04:38 PM
  #1  
AP3XW3TODD's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2009
Posts: 33
Likes: 0
From: IL
and the lord said: "let there not be anymore radio signal!"

I was driving home from school today and I turned my radio (aftermarket Sony Xplod) volume down for a minute, and when I turned it back up... nothing. My antenna still goes up normal. The antenna cable is connected at the spot in the rear driver corner and the back of the radio. It doesn't play anything on any of my stations and when I press SEEK, it reads SEEKING.... and will forever. Is there anything that powers the antenna signal? What should I look for? Could it possibly just be my radio going bad? Any input would be appreciated. Thanks.
Reply
Old Nov 3, 2009 | 10:53 AM
  #2  
Ryan123's Avatar
The Slowskys
Tenured Member 05 Years
iTrader: (3)
 
Joined: Jul 2008
Posts: 540
Likes: 1
From: Massachusetts
What modle do you have S4, S5, convertable, hatch?
Reply
Old Nov 3, 2009 | 02:32 PM
  #3  
AP3XW3TODD's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2009
Posts: 33
Likes: 0
From: IL
1987 s4 na base model
Reply
Old Nov 3, 2009 | 03:26 PM
  #4  
dawicka2's Avatar
well rested,buffet o food
Tenured Member 05 Years
 
Joined: Dec 2006
Posts: 1,605
Likes: 1
From: NY
Blue sensing wire on back of radio is for power antenna/amp turn on.......that is still probably hooked up because the antenna is going up and down.

However, the antenna itself has probably gotten disconnected from the back of your radio, making you "seek" forever.



..............Or you can just pray to your good lord and see if that does anything.

john ny
Reply
Old Nov 3, 2009 | 04:11 PM
  #5  
dawicka2's Avatar
well rested,buffet o food
Tenured Member 05 Years
 
Joined: Dec 2006
Posts: 1,605
Likes: 1
From: NY
Originally Posted by dawicka2
Blue sensing wire on back of radio is for power antenna/amp turn on.......that is still probably hooked up because the antenna is going up and down.

However, the antenna itself has probably gotten disconnected from the back of your radio, making you "seek" forever.



..............Or you can just pray to your good lord and see if that does anything.

john ny
edit: woke up from nap and answered this....neglected the fact that you said ant. cable still hooked up....

I would test it with an older radio. hook up 1 speaker, power, ground, blue wire, and antenna.

If it does the same thing it is not an internal issue.....which it may be.

john ny
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Devon Murray
New Member RX-7 Technical
1
Sep 26, 2015 08:15 AM
rattlehead
New Member RX-7 Technical
2
Sep 25, 2015 10:55 PM
subeone
General Rotary Tech Support
0
Sep 24, 2015 09:58 PM




All times are GMT -5. The time now is 04:23 PM.