Looking For Gauge Panel By Radio
#1
Junior Member
Thread Starter
Join Date: Mar 2013
Location: Arcadia
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Looking For Gauge Panel By Radio
Like title says im looking for a gauge panel/radio dash kit.
I know 1fastT2 use to make them but nothing current showing that hes still doing them. I really would like to have the one with the radio on bottom and gauges on top.
If any of you make these panels or know someone please let me know.
Thank you.
I know 1fastT2 use to make them but nothing current showing that hes still doing them. I really would like to have the one with the radio on bottom and gauges on top.
If any of you make these panels or know someone please let me know.
Thank you.
#5
Junior Member
Thread Starter
Join Date: Mar 2013
Location: Arcadia
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
pics? i can get metra pieces pretty cheap because i use to work at a warehouse that deals with just care audio. Just interested to see how yours looks
#6
MECP Certified Installer
Don't have a pic, but if you scroll to 2:05 in this video, you'll see it clear as day.
I still suggest you watch the whole video and comment in my exhaust thread though.
I still suggest you watch the whole video and comment in my exhaust thread though.
Trending Topics
#8
Junior Member
Thread Starter
Join Date: Mar 2013
Location: Arcadia
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Don't have a pic, but if you scroll to 2:05 in this video, you'll see it clear as day.
I still suggest you watch the whole video and comment in my exhaust thread though.
Rx7 with magnaflow mufflers and Rx7.com presilencer - YouTube
I still suggest you watch the whole video and comment in my exhaust thread though.
Rx7 with magnaflow mufflers and Rx7.com presilencer - YouTube
How many monies?....
#9
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
Sorry Kenny,it was hard to get so NFS,
I just had to Plop that up to prove they do actually exist.It took me 2 years to get that..again..
I just had to Plop that up to prove they do actually exist.It took me 2 years to get that..again..
#10
Junior Member
Thread Starter
Join Date: Mar 2013
Location: Arcadia
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
#13
Junior Member
Thread Starter
Join Date: Mar 2013
Location: Arcadia
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
And i sure will man if I find a solution. Ill do so as soon as possible.
#16
MECP Certified Installer
******* door handle...
#17
Junior Member
Thread Starter
Join Date: Mar 2013
Location: Arcadia
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
We may be best pals then shortly if you still have it somewhat soon <3. Have to get tires and other maintance parts now before fun parts :/
This is dope...
Still looks decent man. And it works.
Still looks decent man. And it works.
#21
Rotaries confuse me
iTrader: (7)
I have the Glowshift one and it fits pretty well. There's small gaps between the top/bottom of it and the surround just from where it's zig-zagging, but it's not bad. For $10 or whatever it is, you can't go wrong.
I would make sure you have gauges that don't have huge faces. Because it's angled there's only so much room for the face to sit before it hits the side of the one next to it. I had to put my Innovate AFR gauge on the left so it didn't have to fit in next to one. The Prosport gauges fit in the right two just fine.
I would make sure you have gauges that don't have huge faces. Because it's angled there's only so much room for the face to sit before it hits the side of the one next to it. I had to put my Innovate AFR gauge on the left so it didn't have to fit in next to one. The Prosport gauges fit in the right two just fine.
#22
Where's the Meth
iTrader: (1)
Innovate Pic please...
I have the Glowshift one and it fits pretty well. There's small gaps between the top/bottom of it and the surround just from where it's zig-zagging, but it's not bad. For $10 or whatever it is, you can't go wrong.
I would make sure you have gauges that don't have huge faces. Because it's angled there's only so much room for the face to sit before it hits the side of the one next to it. I had to put my Innovate AFR gauge on the left so it didn't have to fit in next to one. The Prosport gauges fit in the right two just fine.
I would make sure you have gauges that don't have huge faces. Because it's angled there's only so much room for the face to sit before it hits the side of the one next to it. I had to put my Innovate AFR gauge on the left so it didn't have to fit in next to one. The Prosport gauges fit in the right two just fine.
#24
Rotary Enthusiast
iTrader: (8)
yeah you're better off making your own like I did. Try to find plastic cause I used fiber glass and that was a mission to work with (had the wrong cutting and drill bits).After I finished cutting it i sprayed it down with 3M undercoating and it matches pretty well. I'll post a picture of mine when I get home.
#25
MECP Certified Installer
I think when i redo my radio delete, I am going to mod my 2 metra kits with a flat sheet of ABS the we have at work for custom trim.
My problem is...I do this **** at work all day long, I don't want to do it on my own car.
My problem is...I do this **** at work all day long, I don't want to do it on my own car.