2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Looking for cheap radio surround.

Thread Tools
 
Search this Thread
 
Old Jan 30, 2002 | 12:13 PM
  #1  
supergoat's Avatar
Thread Starter
Eggs are like fowl cheese
Tenured Member 10 Years
 
Joined: Mar 2001
Posts: 574
Likes: 0
From: Daniel Island, SC
Looking for cheap radio surround.

So I went to reground my radio and found a nice hairline crack down the side of my radio surround. Where can I get one of these pieces cheap? The local salvage yards don't have any.

Thanks
Reply
Old Jan 30, 2002 | 12:27 PM
  #2  
JoeZoom's Avatar
zoom...to VROOM!!
Tenured Member 05 Years
iTrader: (1)
 
Joined: Dec 2001
Posts: 363
Likes: 0
From: Ohio
If it is a 86-88 then it's best to buy the piece new as any that you get used will most likely be sun-baked and break as soon as you try to put it in.
Now, you can get one out of a 89+ and they are made out of the rubber type of plastic and hold up better but you will also need to make sure it comes with the air vents as they are different.
Hope this help!
Reply
Old Jan 30, 2002 | 01:30 PM
  #3  
neofreak's Avatar
accept no imitations™
Tenured Member 15 Years
 
Joined: Mar 2001
Posts: 2,096
Likes: 0
From: san francisco
I have a new used one, it was used for about a week, before the car was crashed, happened last winter so the sun had no chance of doing any damage to it. =p

Make an offer..
Reply
Old Jan 30, 2002 | 02:03 PM
  #4  
supergoat's Avatar
Thread Starter
Eggs are like fowl cheese
Tenured Member 10 Years
 
Joined: Mar 2001
Posts: 574
Likes: 0
From: Daniel Island, SC
I'm very bad at making offers. I don't have much extra money for it, so I can offer $30. If that's not what you had in mind, let me know and I'm sure I can work something out.
Reply
Old Jan 30, 2002 | 02:06 PM
  #5  
Roy James's Avatar
My cars louder than yours
Tenured Member 15 Years
 
Joined: Oct 2001
Posts: 1,969
Likes: 0
From: Augusta, GA
do the 89+ bezels bolt in the 86-88 cars with out any fab work?.. i heard the logicon was different and stuck out more or something.
Reply
Old Jan 30, 2002 | 03:10 PM
  #6  
Dennis's Avatar
Junior Member
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 13
Likes: 0
From: Fort Worth, Tx
The 89-91 will fit onto an 86-88 with no problem. Just put one on my 88. Like mentioned, the air vents are different so you will need to change them also.
Reply
Old Jan 30, 2002 | 03:15 PM
  #7  
Felix Wankel's Avatar
Super Newbie
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 4,398
Likes: 1
From: Birmingham, AL
All the Logicons are the same.
Reply
Old Jan 30, 2002 | 03:17 PM
  #8  
Roy James's Avatar
My cars louder than yours
Tenured Member 15 Years
 
Joined: Oct 2001
Posts: 1,969
Likes: 0
From: Augusta, GA
sweet milk, im going to try to get one out of an 89+ car then, screw this damn gay *** fragile "mazda special" plastic... worthless junk.
Reply
Old Feb 16, 2002 | 11:18 PM
  #9  
bflette's Avatar
Junior Member
Tenured Member 10 Years
 
Joined: Aug 2001
Posts: 7
Likes: 0
From: sacramento
I have purchased three of the series five surounds to replace broken ones in series four cars. They all fit very well. I got mine from mazda recycling in rancho cordova. Thats in Ca. (sacramento area) The first one I paid $35 and the other two were included for free on separate ocasions when I was making a rather large purchases. Check out their internet site for more info. The salesperson I always deal with is Jeff. He has always been fair with me in terms of price and returns. BTW last time I was there they had a huge pile of the series five surrounds.
Reply
Old Feb 17, 2002 | 01:28 AM
  #10  
eli's Avatar
eli
Junior Member
Tenured Member 05 Years
 
Joined: Nov 2001
Posts: 25
Likes: 0
From: springfield, oregon
IVE GOT A COUPLE OF EXTRAS IM ALSO LOCAL (springfield) LET ME KNOW ILL HOOK YOU UP
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
izzolaw
1st Gen General Discussion
2
Sep 27, 2015 08:33 PM




All times are GMT -5. The time now is 06:54 PM.