a little DIY for high mount brake light.
#1
Junior Member
Thread Starter
Join Date: Oct 2002
Location: canada
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
a little DIY for high mount brake light.
hello. some people ask me how i got the white refrector lens for the high mount stop light. well....i made one my self......so if anyone interested in making this lens, i will give you some tips!! with the pics attached!!
#2
Junior Member
Thread Starter
Join Date: Oct 2002
Location: canada
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
1. getting the white refrective lens.
you look for the 70'~80's volvo's refrector lens at a junk yard. (I got the lens from my friend, so it didn't cost me a penny!!)
you look for the 70'~80's volvo's refrector lens at a junk yard. (I got the lens from my friend, so it didn't cost me a penny!!)
#3
Junior Member
Thread Starter
Join Date: Oct 2002
Location: canada
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
2. taking the lens out.
taking out the carpet by unscrewing the two of size10 screw then you will see the two size10 nuts(the blue circles) on the body. take out the light housing by unscrewing the nuts.
taking out the carpet by unscrewing the two of size10 screw then you will see the two size10 nuts(the blue circles) on the body. take out the light housing by unscrewing the nuts.
#5
Junior Member
Thread Starter
Join Date: Oct 2002
Location: canada
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
sorry. 3.jpg is wrong.
2.jpg is the right one!! but i can't attach it cuz it is too big file!!! wait for while untill i figure out to reduce the size of the file.
2.jpg is the right one!! but i can't attach it cuz it is too big file!!! wait for while untill i figure out to reduce the size of the file.
#7
Junior Member
Thread Starter
Join Date: Oct 2002
Location: canada
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
4. taking the inner refrect lens out.
this is upto you taking them or not. i took it out before cutting off the lens so that i won't damage it while i cut the lens. use phillip screw driver and break the glued spots. stick the screw driver between the lens and twist it.
this is upto you taking them or not. i took it out before cutting off the lens so that i won't damage it while i cut the lens. use phillip screw driver and break the glued spots. stick the screw driver between the lens and twist it.
Trending Topics
#9
Junior Member
Thread Starter
Join Date: Oct 2002
Location: canada
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
5.cutting the lens.
cut the lesn by using the tool with a cut-off disk. try to cut from the side about 2~3mm depth and cut as stright as possible. if it is not straight, use sand paper to make it flat.
cut the lesn by using the tool with a cut-off disk. try to cut from the side about 2~3mm depth and cut as stright as possible. if it is not straight, use sand paper to make it flat.
#13
Junior Member
Thread Starter
Join Date: Oct 2002
Location: canada
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
continue.....
6.cutting out the white lens.
i believe that some people have already got the idea of what i gonna say. this time, cut the white lens from the volvo's exactly same size as the red lens you just cut off from the stock lens. use the same tool i use at 5.
6.cutting out the white lens.
i believe that some people have already got the idea of what i gonna say. this time, cut the white lens from the volvo's exactly same size as the red lens you just cut off from the stock lens. use the same tool i use at 5.
#15
Junior Member
Thread Starter
Join Date: Oct 2002
Location: canada
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
7.smoothing the edge of the lens.
as you know, the back of the white lens are very rough surface. so you have to smooth out the edge where it will be glued. i used the tool with the cylinder head as you see on the pic. try to shave as flat as possible.
as you know, the back of the white lens are very rough surface. so you have to smooth out the edge where it will be glued. i used the tool with the cylinder head as you see on the pic. try to shave as flat as possible.
#16
Junior Member
Thread Starter
Join Date: Oct 2002
Location: canada
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
8.glue them together.
before you glue them together. make sure that they fit very well without any stress. at this moment, you will realize that the white lens is not flat as you think. then you have to heat it with a kitchen stove to strech it flat.
now you can glue them together!! the glue i used is on the pic. you can try other glue if you can't find it. at the same time, you can also glue the inner reflect lens back.
before you glue them together. make sure that they fit very well without any stress. at this moment, you will realize that the white lens is not flat as you think. then you have to heat it with a kitchen stove to strech it flat.
now you can glue them together!! the glue i used is on the pic. you can try other glue if you can't find it. at the same time, you can also glue the inner reflect lens back.
#17
Damaged Little F*cker
Join Date: Mar 2001
Location: High Point, North Carolina
Posts: 840
Likes: 0
Received 0 Likes
on
0 Posts
cool write up. it looks good on the car. i think white lenses in small areas like the corner lenses and 3rd brake light look cool on most colors. your gonna do one on how you did your tailights next right?
#18
Junior Member
Thread Starter
Join Date: Oct 2002
Location: canada
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
9. wait until it dry.
just be patient.....wait at least 2~3 hours before reinstall it to your car(as you see on the pic, i put a weight on the lens). and don't forget to put the rubber back on the lens....you can use glue gun to attach them together or rubber glue.
10. reinstall it to your car.
i think i don't need to explain how to put it back on your car.......cuz you already know how!!
after you reinstall them, try many colour bulbs and see which one you like......i tried blue bulb and it was nice, but i don't wanna pull over by police....so i put red bulb for now. especially, it looks nice at night time.
ENJOY IT!!
just be patient.....wait at least 2~3 hours before reinstall it to your car(as you see on the pic, i put a weight on the lens). and don't forget to put the rubber back on the lens....you can use glue gun to attach them together or rubber glue.
10. reinstall it to your car.
i think i don't need to explain how to put it back on your car.......cuz you already know how!!
after you reinstall them, try many colour bulbs and see which one you like......i tried blue bulb and it was nice, but i don't wanna pull over by police....so i put red bulb for now. especially, it looks nice at night time.
ENJOY IT!!
#19
Junior Member
Thread Starter
Join Date: Oct 2002
Location: canada
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
OH, i forgot to tell you guys one last DIY.
use the same idea of making the stop light, you can also make the white front and back side lens with the remain volvo's lens(i only made front side lens because my car doesn't have back side lens). i don't have the pic of the side lens right now......but i attach my car's pic and you can see how the stop light looks like from different angle.
use the same idea of making the stop light, you can also make the white front and back side lens with the remain volvo's lens(i only made front side lens because my car doesn't have back side lens). i don't have the pic of the side lens right now......but i attach my car's pic and you can see how the stop light looks like from different angle.
#25
Junior Member
Thread Starter
Join Date: Oct 2002
Location: canada
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
hello. i hope you guys enjoy making it. if you like the blackout one, you can tinted any colour you want on top of it. anyway, IT IS CLEAR LENS!!
you can also check this out:
https://www.rx7club.com/forum/showth...hreadid=124284
by the way, i live in BC.
you can also check this out:
https://www.rx7club.com/forum/showth...hreadid=124284
by the way, i live in BC.