2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

lil help with my 88 tranny / driveshaft probleM?

Thread Tools
 
Search this Thread
 
Old Jan 21, 2005 | 10:56 PM
  #1  
LyFeWoRx's Avatar
Thread Starter
Junior Member
Tenured Member 10 Years
 
Joined: Sep 2003
Posts: 20
Likes: 0
From: WA
lil help with my 88 tranny / driveshaft probleM?

Hello.

I recentely purchased a 88 rx7 se. The transmission seems to be bad there is alot of play when I try to shift into a gear, it seems like there is no track and I can't find the gear. Also when the car rolls it sounds like thunk thunk thunk. Makes me wonder if the driveshaft is bad. I did manage to get the car in gear or what i thought was gear and let the clutch off and nothing happened, the car should have shook and died. If anyone knows of any common problems with the driveshaft or the transmissions please let me know. im new to the rx7 scene but ive been modding dsms for years.

thanks,

Michael
Reply
Old Jan 21, 2005 | 10:58 PM
  #2  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
sounds like worn out shifter bushings.

Not sure about the thuck, how regular is it?
Reply
Old Jan 21, 2005 | 11:05 PM
  #3  
LyFeWoRx's Avatar
Thread Starter
Junior Member
Tenured Member 10 Years
 
Joined: Sep 2003
Posts: 20
Likes: 0
From: WA
well i just got the car so i haven't had a chance to drive it, but just pushing it makes the thud thud thud thud thud thud.
Reply
Old Jan 21, 2005 | 11:13 PM
  #4  
gingenhagen's Avatar
I am 2Furious
Tenured Member 05 Years
 
Joined: Sep 2004
Posts: 846
Likes: 0
From: NJ / Philly
Replacing shifter bushings is real easy. That should fix your loose shifter.

http://www.mazdatrix.com/faq/shiftbsh.htm
Reply
Old Jan 22, 2005 | 02:09 AM
  #5  
LyFeWoRx's Avatar
Thread Starter
Junior Member
Tenured Member 10 Years
 
Joined: Sep 2003
Posts: 20
Likes: 0
From: WA
wonder what that noise could be.
Reply
Old Jan 22, 2005 | 03:31 PM
  #6  
Full Member
Tenured Member 05 Years
 
Joined: Jan 2002
Posts: 67
Likes: 0
From: northern indiana
Sounds like its time to put it up on stands and check it out carefully. Look to see if u-joint is sloppy, or the bolts that connect the driveline flange to the diff yoke are loose. The clutch deal sounds like you may need a clutch too.
When I got my 88 n/a the bushings in the shifter were gone, and finding gears wasn't bad. New bushings can be done in an hour or so.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mulcryant
2nd Generation Specific (1986-1992)
10
Sep 9, 2015 05:24 PM
Enzo1944
New Member RX-7 Technical
2
Sep 6, 2015 08:57 AM




All times are GMT -5. The time now is 06:06 PM.