light throttle hesistations with lean symptoms
#27
Thinking back...the car ran much better when the boost sensor was disconnected. I have my boost sensor ran to the nipple in the UIM, but I've run all the rest of my gauges, bov, and such to different nipples on the TB...I've heard some of those nipples are used for different things but I didn't look through my manual to see which ones, could that be causing a problem?
#29
rotors excite me
iTrader: (16)
I have a pill in my line. I took my '7 to a neighboring city yesterday though and I don't think it started doing this even once. I had one hiccup where it barely stuttered and went to 18.x AFR, but I was running CRAZY low on gas. When I finally got to the gas station I put in 14.517 gallons...
#30
I have a pill in my line. I took my '7 to a neighboring city yesterday though and I don't think it started doing this even once. I had one hiccup where it barely stuttered and went to 18.x AFR, but I was running CRAZY low on gas. When I finally got to the gas station I put in 14.517 gallons...
#32
Eats, Sleeps, Dreams Rotary
iTrader: (4)
Join Date: Apr 2003
Location: Denver, NC
Posts: 3,531
Likes: 0
Received 0 Likes
on
0 Posts
Ant- The FD uses "pills" in the wastegate and pre-turbo control lines. Replacements can be had from Mazda for cheap. Holley jets can also be used. As a rough test, you can get a clamp and pinch the hose( restrict it as the pill would) and see if your issue goes away when the hose is restricted. just don't pinch the hose shut all the way.
#35
Ok, this is starting to make sense. My guess as to what is happening is once the car warms up it goes into open loop where it starts taking input from all the sensors on the car, therefore, if the boost sensor is sending erroneous information from not having the orifice, the car isn't going to function properly.
But when the car is cold "and runs fine" it drives in closed loop where it already has preset fuel mixtures built into the ECU just to keep the car safe and driveable until it warms up.
Am I on the right track with this mindset?.....Man I should be studying for my test that's in an hour and not this, lol....what can ya do
But when the car is cold "and runs fine" it drives in closed loop where it already has preset fuel mixtures built into the ECU just to keep the car safe and driveable until it warms up.
Am I on the right track with this mindset?.....Man I should be studying for my test that's in an hour and not this, lol....what can ya do
#36
destroy, rebuild, repeat
iTrader: (1)
i dont think its a problem with the pill. having the pill in there definately helps with making the signal from your pressure sensor steady, but i dont think its causing your problem.
I had your same problem when i was running rtek2.1.. i found out it only happens if you take any too much fuel out in vacuum. but it didnt seem gradual, like i could take out a little and it would run fine, but just a hair more fuel taken out and it would lean way out to 18's
I had your same problem when i was running rtek2.1.. i found out it only happens if you take any too much fuel out in vacuum. but it didnt seem gradual, like i could take out a little and it would run fine, but just a hair more fuel taken out and it would lean way out to 18's
#38
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
Probably not the orifice (talking to the original poster only). But I'd install one anyway. Its for dampening the vacuum signal to the boost sensor during sudden acceleration as to not muck up the signal.
Rock hard grommets on the injectors bottom side can cause air leaks but are easily found spraying starter fluid at idle in the general area of the injectors.
Does your boost sensors vacuum line have vacuum on it at IDLE?
Spray starter fluid around the back of the throttle body at idle to make sure the three/four nipples back there are not leaking.
Try driving the same but with the 02 disconnected at the 02 sensor and see if the afr's/hesitation is different or not.
Stock injectors? Do you have some device controlling fuel? Like a SAFC or????
Rock hard grommets on the injectors bottom side can cause air leaks but are easily found spraying starter fluid at idle in the general area of the injectors.
Does your boost sensors vacuum line have vacuum on it at IDLE?
Spray starter fluid around the back of the throttle body at idle to make sure the three/four nipples back there are not leaking.
Try driving the same but with the 02 disconnected at the 02 sensor and see if the afr's/hesitation is different or not.
Stock injectors? Do you have some device controlling fuel? Like a SAFC or????
#39
Senior Member
Join Date: Aug 2009
Location: Los Angeles
Posts: 479
Likes: 0
Received 0 Likes
on
0 Posts
Sure sounds like the closed loop operation is not working right; AFR at cruise and light accel should be near stoichiometric (14.7:1), assuming your aftermarket ECU is managing that region the same as the stock... since you have an O2 sensor, that would imply it is (or is supposed to).
I would check to see that the ECU is really going into closed loop at cruise... and what is the O2 voltage there? It should toggle back and forth between about .6-.8 (rich) and .2-4 (lean). It could be that your ECU is getting a (false) rich signal, and is reducing the mixture to try to get to stoichiometric, causing the lean condition. That would be consistent with your AFR readings (ok in open loop, lean in closed).
I would check to see that the ECU is really going into closed loop at cruise... and what is the O2 voltage there? It should toggle back and forth between about .6-.8 (rich) and .2-4 (lean). It could be that your ECU is getting a (false) rich signal, and is reducing the mixture to try to get to stoichiometric, causing the lean condition. That would be consistent with your AFR readings (ok in open loop, lean in closed).
#40
Probably not the orifice (talking to the original poster only). But I'd install one anyway. Its for dampening the vacuum signal to the boost sensor during sudden acceleration as to not muck up the signal.
Rock hard grommets on the injectors bottom side can cause air leaks but are easily found spraying starter fluid at idle in the general area of the injectors.
Does your boost sensors vacuum line have vacuum on it at IDLE?
Stock injectors? Do you have some device controlling fuel? Like a SAFC or????
#41
Senior Member
Join Date: Aug 2009
Location: Los Angeles
Posts: 479
Likes: 0
Received 0 Likes
on
0 Posts
This sure sounds like the ECU is not playing properly with the O2 sensor. AFR at cruise should be around stoichiometric (14.7:1), and the O2 reading should be toggling between high (>0.5v) and low (<0.5v). Assuming your ECU works in closed loop like the stock unit, if it is getting a steady false high (>0.5v) at cruise, it will ratchet down the mixture trying to correct that and give you the lean AFR you are seeing, and result in lean misfire. Under more throttle, the stock ECU goes into open loop (I assume your programming does the same), which would explain why it runs well under heavy acceleration.
Not the only possible cause, but worth checking. See what the O2 voltage is doing during steady cruise... if it is not toggling, that will narrow down the possibilities.
Not the only possible cause, but worth checking. See what the O2 voltage is doing during steady cruise... if it is not toggling, that will narrow down the possibilities.
#42
so the Mazda dealership lost the orifice when I went to pick it up this morning....sigh, now I have to wait until Monday :/. I'm thinking about either disconnecting the vacuum line or tieing a ziptie around it so I can at least drive it around tonight and throughout the 60 degree weather weekend?
#43
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
It might be that when the boost/pressure sensor is disconnected..........the car won't go into closed loop. In fact it won't. That's a given
So. Instead of pulling the plug on the boost/pressure sensor, PULL THE PLUG OFF THE 02 SENSOR instead. Little to NO harm in doing that. THEN see how it drives.
So. Instead of pulling the plug on the boost/pressure sensor, PULL THE PLUG OFF THE 02 SENSOR instead. Little to NO harm in doing that. THEN see how it drives.
#44
It might be that when the boost/pressure sensor is disconnected..........the car won't go into closed loop. In fact it won't. That's a given
So. Instead of pulling the plug on the boost/pressure sensor, PULL THE PLUG OFF THE 02 SENSOR instead. Little to NO harm in doing that. THEN see how it drives.
So. Instead of pulling the plug on the boost/pressure sensor, PULL THE PLUG OFF THE 02 SENSOR instead. Little to NO harm in doing that. THEN see how it drives.
#46
nope, longer I drive it the worse it gets, was trying to cruise around with some friends but AFR's stayed in the 18's and the car was bucking so I had to turn around and miss all the fun . Will be trying more ideas tomorrow...
Things noted...open/closed loop make no difference in performance....mechanical problem then? possible clogged fuel filter or sock in fuel tank? Voltage drop to fuel pump? Hopefully find out tomorrow
Things noted...open/closed loop make no difference in performance....mechanical problem then? possible clogged fuel filter or sock in fuel tank? Voltage drop to fuel pump? Hopefully find out tomorrow
#47
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
Does not seem to be a clogged filter/screen to me since the hesitation goes away when the pedal is depressed. Only happens under light throttle from what I remember.
MIGHT be a AFM problem. But only if someone has removed the large black plastic cover off it and moved the spring tension to where it should not be.
Does the pressure/boost sensor have the right part numbers on it. NOt a non turbo sensor in a turbo car or vice versa. Same with the ECU part numbers.
MIGHT be a AFM problem. But only if someone has removed the large black plastic cover off it and moved the spring tension to where it should not be.
Does the pressure/boost sensor have the right part numbers on it. NOt a non turbo sensor in a turbo car or vice versa. Same with the ECU part numbers.
#48
Does not seem to be a clogged filter/screen to me since the hesitation goes away when the pedal is depressed. Only happens under light throttle from what I remember.
MIGHT be a AFM problem. But only if someone has removed the large black plastic cover off it and moved the spring tension to where it should not be.
Does the pressure/boost sensor have the right part numbers on it. NOt a non turbo sensor in a turbo car or vice versa. Same with the ECU part numbers.
MIGHT be a AFM problem. But only if someone has removed the large black plastic cover off it and moved the spring tension to where it should not be.
Does the pressure/boost sensor have the right part numbers on it. NOt a non turbo sensor in a turbo car or vice versa. Same with the ECU part numbers.
On a side note...went to the local 1/4 mile strip at Charlotte today and witnessed a 450whp FD hold off a 725 whp supra until about the last 100ft!
#49
....stumped again...
Me and a friend tried swapping our n318 boost sensors..., running the car without the tps and air temp sensor connected (by mistake), capping a minor vacuum leak from my water injection, reconecting the 02 sensor to no avail...I'm stumped at the moment and a little frustrated with this thing cuz damn it pulls hard under boost which is a lot of fun until I look at my AFR gauge and it's reading 13's and up .
...motor still lives to see another day, but gotta get this fixed before my right foot gets tired of restricting this thing
Me and a friend tried swapping our n318 boost sensors..., running the car without the tps and air temp sensor connected (by mistake), capping a minor vacuum leak from my water injection, reconecting the 02 sensor to no avail...I'm stumped at the moment and a little frustrated with this thing cuz damn it pulls hard under boost which is a lot of fun until I look at my AFR gauge and it's reading 13's and up .
...motor still lives to see another day, but gotta get this fixed before my right foot gets tired of restricting this thing
#50
disconnected my n318 boost sensor...problem vanished and car runs better than my DD saturn sc2. I can cruise from 1k-2k rpms all day long any gear without a blip and AFR's won't go over 14.3. It isn't adding much fuel under boost which I can understand without the boost sensor being there so I'm keeping a light foot but boy is it fun just to be able to drive without having to fight the car in every gear...*sigh of relief*...
Any ideas why this is the case fc Guru's?
Any ideas why this is the case fc Guru's?