Leaky vacume lines?
#1
Full Member
Thread Starter
Join Date: Oct 2001
Location: Burbank, CA
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
Leaky vacume lines?
Hey guys, just 2 weeks ago I did my Throttle body mod. I really like it, only one thing though...
My idle is now kinda stumbly. It doesn't really stay still at 750. It kinda swings + or - 100 rpm. When i removed the UIM, I disconnected some vacume lines (which put back in), some where a little hard by the connecting tip. Could this be caused by a leaky or semi-broken line.
Oh another thing, when it's cold sometimes it doesn't pick up really well, like the turbo wont want to spool. I kinda feel this is asociated with the same deal.
Thanks
My idle is now kinda stumbly. It doesn't really stay still at 750. It kinda swings + or - 100 rpm. When i removed the UIM, I disconnected some vacume lines (which put back in), some where a little hard by the connecting tip. Could this be caused by a leaky or semi-broken line.
Oh another thing, when it's cold sometimes it doesn't pick up really well, like the turbo wont want to spool. I kinda feel this is asociated with the same deal.
Thanks
#2
I'm a boost creep...
Join Date: Jan 2002
Location: Auckland, New Zealand
Posts: 15,608
Likes: 0
Received 8 Likes
on
8 Posts
After doing the TB mod both the idle speed and the TPS need to be reset. If you still have the problem after doing those then look for a vac leak.
Last edited by NZConvertible; 10-13-03 at 03:16 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
Tem120
3rd Generation Specific (1993-2002)
4
09-07-15 09:53 AM
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM