Originally Posted by MillerLite

im just trying to get rid of hesitation... i just dont know how..

and i wasnt looking for the main relay, i was wondering what this chomped up relay is on my car! its just not a good thing, the wires are fried up to hell.

Originally Posted by JamesWade2002

check everything. look for vacume leaks everywere including unlikely places like the lines going to the power brake mastercyclinder, caps on the back of the upper intake, and your ECU temp sensor needs to be checked out, also. This is the sensor on the back of the water pump housing with the plug that looks like an injector clip thats green. check the resistance across it, I compared it will a factory one that I had lying around and the two were very different the bad one had lots of resistance, I believe the good one I am using now had like .300 or less. I really can't remember ask Wayne88N/A. Do not buy the autozone one that is yellow, it will die in less than 6 monthes garanteed, I went through two of them. check your TPS voltage. somebody help me out here, I know there are other things that control that stuff. You don't need your BAC unless you have AC or power steering and maybe not even then, so don't listen to the nay sayers on here that say you can't run an electric fan without it, its not your problem. I'm pretty much retarded anyway and I'd have to see the car and drive it, but that is what I would check and what I went through when mine did that. That Temp sensor is critical, your engine will run super rich and be very.....um...hesistant and jumpy, if it goes bad.

Originally Posted by WAYNE88N/A

Ahh, ok, well it could be your air bypass valve relay, or retractor relay for the headlights...