Last few problems before project is finished
01-13-08, 01:31 PM
#1
All Blacked Out
Thread Starter
iTrader: (2)
Join Date: Aug 2007
Location: Virginia
Posts: 411
Likes: 0
Received 0 Likes
on
0 Posts
Last few problems before project is finished
The car im working on is a 1987 Manual 13BT
What is this, its on the transmission, and its sposed to have two prongs but one broke, i need to replace it.
What are these go to, the next connector up the wire goes to the oil pressure sensor?
I cut this wire, i cant remember why but i know its the oil level sensor, where does it conect, any clues?
These are both on the left side of the car, near the lights and need to know what they go to.
i have no clue whats up with this, does that red wire sposed to go to a three wire female conector instead of the two one i have coneccted in the photo?
What is this, its on the transmission, and its sposed to have two prongs but one broke, i need to replace it.
What are these go to, the next connector up the wire goes to the oil pressure sensor?
I cut this wire, i cant remember why but i know its the oil level sensor, where does it conect, any clues?
These are both on the left side of the car, near the lights and need to know what they go to.
i have no clue whats up with this, does that red wire sposed to go to a three wire female conector instead of the two one i have coneccted in the photo?
01-13-08, 01:46 PM
#2
King of the Loop
The thing on the ps behind the light is a resistor pack for your fuel injectors. I have some ideas about the other stuff but its hard to be sure from pics and I dont want to feed you wrong info.
01-14-08, 03:06 PM
#4
Full Member
iTrader: (1)
Join Date: Jan 2007
Location: St. Louis
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
Third picture is the oil level warning in the side of the oil pan. This tells you if your oil is low with a loud buzzer/ Don't run without this as it is critical for any engine to have oil. HA HA
01-14-08, 03:10 PM
#5
Full Member
iTrader: (1)
Join Date: Jan 2007
Location: St. Louis
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
4th picture kind of looks like the coolant level indicator. This also makes a loud buzz if your coolant is low. I really can't tell from that picture though. Becasue it is a 2 prong conector, it could go to the electric fan (if you have one) or the ac preasure switch. Better pictures would help on this one. What color are the wires in it? What year is your car? coupe or convertible?
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
