OK so I got my coilovers in and installed them. One thing that is really bothering me and makes no sense is that with the camber plate set to full negative camber( towards the engine) the wheels sit straight. As in 0 degress of camber. I dropped it about 1.5-2 inches.

This can't be normal can it? Are they side specific? I did'nt see anything marked on them.

I'm hoping that somebody with the ksports could shed some light.

 

you may have the camber plates on backwards. you can rotate them without removing the coilovers...

 

The top bolt of the 2 at the bottom of the strut that hold it to the hub is slotted, loosen those 2 bolts off then sort of lift and push the hub in as far as it will go then retighten the bolts. That should get you 2 or 3 degrees negative