Just installed MazdaTrix Short Shifter, took her for a boot and....
#1
Senior Member
Thread Starter
Join Date: Jun 2003
Location: Toronto
Posts: 634
Likes: 0
Received 0 Likes
on
0 Posts
Just installed MazdaTrix Short Shifter, took her for a boot and....
I LOVE IT! Cept she RATTLES (BOOOO)...My stock shifter rattled also so whatever!
What do you guys do to ignore the rattle? Bump tunes? Hold the shifter to insulate it?
What do you guys do to ignore the rattle? Bump tunes? Hold the shifter to insulate it?
#4
Senior Member
Join Date: Apr 2004
Location: calgary canada
Posts: 474
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by sleejay
...get new shifter bushings...
id say bump the tunes!
#7
Senior Member
Join Date: Jun 2002
Location: Calgary, A.B.
Posts: 407
Likes: 0
Received 0 Likes
on
0 Posts
fix
My shifter rattled but i got rid of it
In the first picture the piece that’s circled in red was what made mine rattle. Its the piece that drops in where that old bushing goes.
I just shimmed it in there in 3 places. I used some rubber that I cut from the inside of the second picture. The second pic isnt that good but you get the picture. Now once that circled red piece is in there with the rubber it doesn’t move what so ever.
I put everything back together and no more rattling.
if you want i can go take a picture of mine. THe rubber i shimmed is just in 3 places like a triangle
In the first picture the piece that’s circled in red was what made mine rattle. Its the piece that drops in where that old bushing goes.
I just shimmed it in there in 3 places. I used some rubber that I cut from the inside of the second picture. The second pic isnt that good but you get the picture. Now once that circled red piece is in there with the rubber it doesn’t move what so ever.
I put everything back together and no more rattling.
if you want i can go take a picture of mine. THe rubber i shimmed is just in 3 places like a triangle
Last edited by 86J; 04-15-05 at 08:05 PM.
Trending Topics
#10
Senior Member
Join Date: Jun 2002
Location: Calgary, A.B.
Posts: 407
Likes: 0
Received 0 Likes
on
0 Posts
The picture are on here http://members.shaw.ca/redrx7/
first 2 show some what of the rubber as its a tight fit. second ones the best it points to the rubber
the last one is just of my car.
I guess I only put 1 rubber shim in there. oh well it doesnt rattle! I got the rubber in there by wedging that red circled piece and the rubber in on kind of an angle and just pushing it down. once its in there its really hard to get out.
first 2 show some what of the rubber as its a tight fit. second ones the best it points to the rubber
the last one is just of my car.
I guess I only put 1 rubber shim in there. oh well it doesnt rattle! I got the rubber in there by wedging that red circled piece and the rubber in on kind of an angle and just pushing it down. once its in there its really hard to get out.
#11
Senior Member
Join Date: Aug 2004
Location: Albuquerque, New Mexico
Posts: 504
Likes: 0
Received 0 Likes
on
0 Posts
Now that's funny!
Originally Posted by tie pilot
put a rubber band around the shifter and put the other end around, like, your cigarette lighter = )