Intermittent left F/R speakers?
#1
Newbie
Thread Starter
Join Date: Jan 2005
Location: Pasadena, CA
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Intermittent left F/R speakers?
I have a 1986 FC/NA with stock radio and speakers. No eq.
The left front and left rear speakers mostly don't work but sometimes when I go over a bump, they both simultaneously come on fine, and then work for a while until some time later (usually 5-10 min) when I go over another bump, and then will stay off for weeks/months until I hit just the right next bump again. When they are on, they sound fine.
Am new to the forum; lots of good info here though.
Any help on where the problem might be and how to fix it?
The left front and left rear speakers mostly don't work but sometimes when I go over a bump, they both simultaneously come on fine, and then work for a while until some time later (usually 5-10 min) when I go over another bump, and then will stay off for weeks/months until I hit just the right next bump again. When they are on, they sound fine.
Am new to the forum; lots of good info here though.
Any help on where the problem might be and how to fix it?
#2
Seduced by the DARK SIDE
Join Date: Apr 2001
Location: Orange Park FL (near Jax)
Posts: 7,323
Likes: 0
Received 2 Likes
on
2 Posts
I need to introduce you to "CRC QD contact cleaner" from the electric section at Home Depot.
Good for stereo controls, logicon sliders & buttons, door lock position sensors, & TPS.
The only hard part is getting access to the volume & balance controls inside the radio.
Good for stereo controls, logicon sliders & buttons, door lock position sensors, & TPS.
The only hard part is getting access to the volume & balance controls inside the radio.
#3
Newbie
Thread Starter
Join Date: Jan 2005
Location: Pasadena, CA
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
That of course makes sense. I'll get to know Home Depot and will start from there; thanks lots.
Now I need to fix my clock, but I know already, that's a cold solder joint, and the horn too...
Now I need to fix my clock, but I know already, that's a cold solder joint, and the horn too...
#4
^ welcome to the world of elecrtical problems, (my car has the flashing seatbelt light going on 24/7, horn doesn't work, and interior light doesnt't work, also oil gauge broke and needed to buy after market gauge)
#5
Junior Member
Join Date: Feb 2008
Location: Chesapeake
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
i know i'm bringing this back from the dead. but i have the same exact problem. did the contact cleaner fix the problem?
Thread
Thread Starter
Forum
Replies
Last Post
rx8volks
Canadian Forum
0
09-01-15 10:46 PM