2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

Interior Help!

Thread Tools
 
Search this Thread
 
Old 06-15-07, 09:35 PM
  #1  
Junior Member

Thread Starter
 
86_7's Avatar
 
Join Date: May 2005
Location: Calgary, Alberta, Canada
Posts: 17
Likes: 0
Received 0 Likes on 0 Posts
Interior Help!

Hi, I have a 1986 GXL and am in the middle of trying to replace my dash as the one that I have in there is a bit knarly right now. Any one have any tips at all for me that could be helpful to ease this process...
any help will be most appreciated.
Thanks.
Old 06-15-07, 09:42 PM
  #2  
Full Member

 
highwayinthesky's Avatar
 
Join Date: May 2006
Location: calgary
Posts: 225
Likes: 0
Received 0 Likes on 0 Posts
hey man i have taken the dash out of my project car about a billion times.

my best and only advice for you is GO SLOW!!!!!!!!, this cant be stressed enough. once the dash is unbolted there are two wiring connections, one for the heater and one around the right windshield vent, these were the tricky one i had/have problems with.

just remeber go slow and have a friend with you to help get the dash out of the car.

good luck!
Old 06-16-07, 05:36 PM
  #3  
'89 GTUs

iTrader: (1)
 
Omixeo's Avatar
 
Join Date: Aug 2005
Location: Tucson, Arizona
Posts: 953
Likes: 0
Received 0 Likes on 0 Posts
Go VERY SLOW. The plastic pieces are really old and brittle and like to break.




All times are GMT -5. The time now is 11:09 AM.