dr0x

There are 4 bolts holding it on. Anyone know the correct sizes of these bolts? Or a part # would be great

Wankel7

9079-40-835

That should be the Mazdapart number. Make sure you check with mazdaformance.com first. Then check with your local dealer. Mazdaformance.com with shipping will probally be the same as local dealer. But buy from Mazdaformance.com. They are great!

Also, if you fish around the RX-7 are you will quickly find ALL of the parts fische!

James

Scott 89t2

umm there are 2 different ones.. 2 are longer.

Wankel7

I looked at my parts diagram and it shows the same part numbers for both drivers and passenger side.

Dont know. I am sure you have seen a few intercoolers scott

James

yearrgh

The passanger side are longer

600HP CLUB

i took mines out, i only have 12mm with washer on passenger side and another 12mm on the driver side because i always do my tps and they starting dissapearing on me.

meaing two is enough for me

dr0x

Ok thanks for the part #. Two is probably enough (you could probably get away with none even), but it looks better w/ all the proper bolts.