Instrument Cluster (will 89-91 from a NA fit into a 87-88 T2)
#1
Full Member
Thread Starter
Join Date: Feb 2003
Location: San Clemente
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Instrument Cluster (will 89-91 from a NA fit into a 87-88 T2)
I need to get a new instrument cluster. Can anyone tell me if the cluster from a 89-91 N/A will work in a 87-88 T2. Thanks for your input....
#3
putting it down daily
check this: http://www.rotaryresurrection.com/t2conversion2.htm
Also- do a search on "gauge swap"
TK
Also- do a search on "gauge swap"
TK
#4
Former Moderator. RIP Icemark.
It can be done. But requires re-wiring/re-pinning the harness.
There was a thread on it not long ago, you may wish to use the search function found in the top right hand corner of this page.
There was a thread on it not long ago, you may wish to use the search function found in the top right hand corner of this page.
#5
Do a barrel roll!
iTrader: (4)
It was my thread that I asked this, and I now have a working S5 N/A cluster in my S4 N/A, it just required some wire-relocation..
https://www.rx7club.com/forum/showth...e+cluster+swap
Now a N/A cluster in a Turbo will likely be different, because of the boost gauge in the turbo is a coolant temp gauge in the N/A, so I cant help you on that..
https://www.rx7club.com/forum/showth...e+cluster+swap
Now a N/A cluster in a Turbo will likely be different, because of the boost gauge in the turbo is a coolant temp gauge in the N/A, so I cant help you on that..
Thread
Thread Starter
Forum
Replies
Last Post